< Back ×
My Vehicle Change Vehicle
2005 Buick Park Avenue
< Back to View All
Trunks & Tailgates
- Department
- Prices
OEM (Genuine) 2005 Buick Park Avenue Actuator
PartNumber: 16640853
Product Specifications- Notes: Park Avenue
- Other Names: Actuator, Lock Actuator
- Item Dimensions: 19.9 x 10.7 x 2.2 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 16631979
- Part Description: 2005 Buick Park Avenue Actuator
Vehicle Fitment- 2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
OEM (Genuine) 2005 Buick Park Avenue Latch Asm-Rear Compartment Lid
PartNumber: 25762646
Product Specifications- Other Names: Lock
- Item Dimensions: 11.2 x 4.5 x 2.7 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25726748
- Part Description: 2005 Buick Park Avenue Latch Asm-Rear Compartment Lid
Vehicle Fitment- 2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
FAQ for Trunk Lid Latch Repair
Q: How to remove the Lock Striker-Rear Compartment Lid?
A:
First, you need to remove the rear compartment sill plate. Then, please remove the nut retaining latch striker from inside the rear compartment and remove the right fascia. Finally, you should remove the nuts retaining latch striker from outside the rear compartment and remove the rear compartment latch striker.
By Bob
GM Specialist
01/11/2022Q: How to remove the Latch-Rear Compartment Lid?
A:
First, you need to remove the rear compartment lid trim and disconnect the electrical connector from the lid latch assembly. Then, please remove the bolts retaining the lid latch assembly and remove the actuator cable from the latch. Finally, you should remove the lid latch assembly.
By Bob
GM Specialist
01/11/2022Q: How to install the Latch-Rear Compartment Lid?
A:
First, you need to install the lid latch assembly and install the bolts retaining the lid latch assembly. Then, please install an actuator cable to latch and connect the electrical connector to the lid latch assembly. Finally, you should install the rear compartment lid trim.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the bolts retaining the lid latch assembly?
A:
The recommended torque is 10.5 N.m (93 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the latch striker nuts?
A:
The recommended torque is 9 N.m (80 lb in).
By Bob
GM Specialist
01/11/2022Q: How to install the Lock Striker-Rear Compartment Lid?
A:
First, you need to install the rear compartment latch striker and install the nuts retaining the latch striker. Then, please adjust the rear compartment latch striker. Finally, you should install the fascia and the rear compartment sill plate.
By Bob
GM Specialist
01/11/2022See more FAQs (1)