2005 Buick Park Avenue Window Regulator

The recommended torque is 10 N.m (89 lb in).

First, you need to remove the door trim panel, the water deflector, the door trim panel bracket fasteners, and the trim panel bracket, and disconnect the outside door handle rod from the door latch. Then, please reconnect the power window switch, gain access to the front window clamp through the access hole, release the window from the module, manually lift the window to the fully closed position, and tape the window in place. You also need to disconnect the power window motor electrical connector, disconnect the door latch wiring harness from the door wiring harness, remove the upper fasteners, loosen the 3 lower fasteners, remove the door latch fasteners, and remove the power window module with the door latch attached. Finally, you should disconnect the inside door handle and lock rods from the door latch, remove the door latch wiring harness and the door latch from the power window module, and remove the inside door handle and lock rods from the inside door handle.