< Back ×
My Vehicle Change Vehicle
2005 Buick Park Avenue
< Back to View All
Wipers & Washers
- Department
- Prices
OEM (Genuine) 2005 Buick Park Avenue Arm Asm-Windshield Wiper
PartNumber: 25713947
Product Specifications- Location: Driver Side
- Other Names: Wiper Arm
- Item Dimensions: 23.9 x 3.6 x 1.6 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25654881, 25692924, 25695419, 25666847
- Part Description: 2005 Buick Park Avenue Arm Asm-Windshield Wiper
Vehicle Fitment- 2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
OEM (Genuine) 2005 Buick Park Avenue Arm Asm-Windshield Wiper
PartNumber: 25713948Product Specifications- Location: Passenger Side
- Other Names: Wiper Arm
- Item Dimensions: 27.2 x 2.1 x 1.4 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25642728, 25695418, 25680729
- Part Description: 2005 Buick Park Avenue Arm Asm-Windshield Wiper
Vehicle Fitment- 2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
FAQ for Windshield Wiper Arms Repair
Q: How to remove the Wiper Arm?
A:
First, you need to turn the ignition switch to the ACCY position, set the wiper switch to the DELAY or AUTO DELAY position, and turn the ignition OFF when the wiper arms are in the inner wipe position and not moving. Then, please disconnect the washer hose from the washer hose connector, mark the position of the wiper blade on the windshield with a suitable marker or masking tape, and raise the hood. Finally, you should remove the cover from the nut, remove the wiper arm from the drive shaft, clean the drive shaft knurls with a wire brush, and remove the wiper blade from the wiper arm.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the nut securing the transmission drive shaft?
A:
The recommended torque is 25 N.m (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What kind of special tool is needed when replacing the Wiper Arm?
A:
You need to use the J 39822 Wiper Arm Puller.
By Bob
GM Specialist
01/11/2022