2005 Buick Rainier Door Armrest

You should position the garnish molding to the center pillar, connect the electrical connector to the temperature sensor, index the positioning tabs on the garnish molding to the corresponding holes in the center pillar, seat the 4 garnish molding retaining tabs to the center pillar, return the seat to neutral position and install the front and rear door sill plates.

You should remove the two bolts securing the rear seat cushion assembly to the seat latch rod, the rear seat cushion assembly, the pull handle assembly, the J-strips securing the rear seat cushion cover to the seat cushion panel, the seat cushion panel from the pad and cover and the hog rings from the seat cover, carefully separate the hook and loop fastener strips holding the cover to the pad and remove the hog rings.