< Back ×
My Vehicle Change Vehicle
2005 Buick Rainier
< Back to View All
Door Sheet Metal, Moldings & Weatherstrips
- Department
- Prices
OEM (Genuine) 2005 Buick Rainier Surround Weatherstrip
PartNumber: 19168173
Product Specifications- Notes: Gray
- Location: Driver Side; Passenger Side
- Other Names: Surround Weatherstrip
- Item Dimensions: 18.9 x 18.7 x 8.2 inches
- Item Weight: 6.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19120578, 19151468, 19209559, 19120580, 88987563, 88987565, 19120579
- Part Description: 2005 Buick Rainier Surround Weatherstrip
Vehicle Fitment- 2005 Buick Rainier | CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
$76.56 MSRP:$120.42You Save: $43.86 (37%)
OEM (Genuine) 2005 Buick Rainier Surround Weatherstrip
PartNumber: 19168171
Product Specifications- Notes: Cashmere;Gray
- Location: Driver Side
- Other Names: Surround Weatherstrip
- Item Dimensions: 4.8 x 18.1 x 17.5 inches
- Item Weight: 3.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19209561, 88892609, 19120582, 19120581, 88987559, 88987080, 19209560, 19151465, 19120583
- Part Description: 2005 Buick Rainier Surround Weatherstrip
Vehicle Fitment- 2005 Buick Rainier | CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
$93.73 MSRP:$141.41You Save: $47.68 (34%)OEM (Genuine) 2005 Buick Rainier Surround Weatherstrip
PartNumber: 19168172
Product Specifications- Notes: Cashmere
- Location: Passenger Side
- Other Names: Surround Weatherstrip
- Item Dimensions: 17.5 x 16.9 x 4.7 inches
- Item Weight: 3.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 88987560, 19120586, 19120584, 19151466, 88987079
- Part Description: 2005 Buick Rainier Surround Weatherstrip
Vehicle Fitment- 2005 Buick Rainier | CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
$93.73 MSRP:$141.41You Save: $47.68 (34%)
OEM (Genuine) 2005 Buick Rainier Surround Weatherstrip
PartNumber: 19120580
Product Specifications- Notes: Cashmere
- Location: Driver Side; Passenger Side
- Other Names: Surround Weatherstrip
- Item Dimensions: 17.7 x 17.8 x 3.1 inches
- Item Weight: 3.20 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 19168173
- Part Description: 2005 Buick Rainier Surround Weatherstrip
Vehicle Fitment- 2005 Buick Rainier | CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
$76.56 MSRP:$120.42You Save: $43.86 (37%)OEM (Genuine) 2005 Buick Rainier Surround Weatherstrip
PartNumber: 19209563
Product Specifications- Notes: Gray
- Location: Passenger Side
- Other Names: Surround Weatherstrip
- Item Dimensions: 3.1 x 17.9 x 17.3 inches
- Item Weight: 3.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19120585, 88987081
- Part Description: 2005 Buick Rainier Surround Weatherstrip
Vehicle Fitment- 2005 Buick Rainier | CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
$77.80 MSRP:$122.37You Save: $44.57 (37%)
OEM (Genuine) 2005 Buick Rainier Front Weatherstrip
PartNumber: 25775653
Product Specifications- Location: Passenger Side
- Other Names: Front Weatherstrip, Sealing Strip
- Item Dimensions: 4.2 x 23.1 x 1.2 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15284191, 15155416
- Part Description: 2005 Buick Rainier Front Weatherstrip
Vehicle Fitment- 2005 Buick Rainier | CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
$6.87 MSRP:$10.35You Save: $3.48 (34%)
OEM (Genuine) 2005 Buick Rainier Front Weatherstrip
PartNumber: 25775652
Product Specifications- Location: Driver Side
- Other Names: Front Weatherstrip, Sealing Strip
- Item Dimensions: 4.0 x 22.8 x 1.2 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15284190, 15155415
- Part Description: 2005 Buick Rainier Front Weatherstrip
Vehicle Fitment- 2005 Buick Rainier | CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
FAQ for Door Seal Repair
Q: How to remove the Weatherstrip-Rear Door Opening?
A:
You should remove the rear door sill plate and the weatherstrip from the pinch-weld flange.
By Bob
GM Specialist
01/11/2022Q: How to remove the Weatherstrip-Front Door Opening?
A:
You should remove the front door sill plate and the weatherstrip from the pinch-weld flange.
By Bob
GM Specialist
01/11/2022Q: How to install the Weatherstrip-Front Door Opening?
A:
You should align the weatherstrip to the door opening with the 2 dots positioned on the upper right and left side and the weatherstrip to the door opening with the bond joint positioned at the lower center of the door opening, install the weatherstrip to the pinch-weld flange, ensure that the weatherstrip is fully seated and install the front door sill plate.
By Bob
GM Specialist
01/11/2022Q: How to remove the Weatherstrip - Auxiliary?
A:
You should open the side doors, right or left side, remove the push pin retainers from the front door sealing weatherstrip located at the base of the pillar, pull back the front door sealing weatherstrip to expose the weatherstrip side retainer screws, and remove the screws from the weatherstrip side retainer and the weatherstrip side retainer from the windshield pillar.
By Bob
GM Specialist
01/11/2022Q: How to install the Sealing Strip-Rear Door Upper?
A:
You should insert the sealing strip tab into the door sheet metal, position the sealing strip to the door pinch-weld flange and apply pressure to seat the sealing strip, and ensure that the sealing strip is fully seated against the pinch-weld flange.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the screws tightened to the weatherstrip side retainer?
A:
The recommended torque is 2 Nm (18 lb in).
By Bob
GM Specialist
01/11/2022Q: How to install the Weatherstrip-Rear Door Opening?
A:
You should align the weatherstrip to the door opening with the 2 dots positioned on the upper right and left side, align the weatherstrip to the door opening with the bond joint positioned at the lower center of the door opening, install the weatherstrip to the pinch-weld flange, ensure that the weatherstrip is fully seated and install the rear door sill plate.
By Bob
GM Specialist
01/11/2022Q: How to remove the Sealing Strip-Rear Door Upper?
A:
You should pull the sealing strip away from the door pinch-weld flange, lift upward to remove the upper portion of the sealing strip from the door pinch-weld flange, and remove the sealing strip from the door.
By Bob
GM Specialist
01/11/2022Q: How to remove the Weatherstrip Side Retainer?
A:
You should open the front door, remove the push-pin retainers from the front door sealing auxiliary weatherstrip located at the base of the pillar, pull back the front door sealing weatherstrip to expose the windshield side reveal molding screws, and remove the screws from the windshield side reveal molding and the reveal molding from the windshield pillar.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the screws tightened to the side reveal molding?
A:
The recommended torque is 2 Nm (18 lb in).
By Bob
GM Specialist
01/11/2022See more FAQs (5)