2005 Buick Rainier Window Motor

You should position the actuator over the mounting studs and install the retaining nuts, connect the electrical connector, ensure the window latch bracket is pinned to the window frame, position the bellcrank at a 45-degree angle, position the bellcrank at a 45-degree angle to the sheet metal flange, install the screw connecting the window bracket to the actuator arm, remove the window bracket to the window frame pin, verify the operation of the body side window and install the rear interior trim panel.

You should remove the midgate inner panel and the midgate window, disconnect the midgate window regulator electrical connector and remove the midgate window position switch from the window regulator, the nuts retaining the window regulator to the midgate, and the regulator from the midgate.

The recommended torque is 5 Nm (9 lb in).

You should install the regulator to the midgate, the nuts retaining the window regulator to the midgate, and the midgate window position switch to the window regulator, connect the window regulator electrical connector, install the midgate window, check and adjust the midgate window alignment to the weatherstrip channel and install the midgate inner panel.

You should remove the window regulator, the bolts retaining the window regulator motor to the window regulator, and the window regulator motor from the window regulator.