< Back ×
My Vehicle Change Vehicle
2005 Cadillac SRX
< Back to View All
Brake Boosters & Brake Master Cylinders
- Department
- Series
- Brands
- Prices
OEM (Genuine) 2005 Cadillac SRX Cylinder, Brake Master
PartNumber: 10367561
Product Specifications- Other Names: Master Cylinder
- Item Dimensions: 8.2 x 6.1 x 12.5 inches
- Item Weight: 2.20 Pounds
- Part Description: 2005 Cadillac SRX Cylinder, Brake Master
Vehicle Fitment- 2005 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
Centric® Premium™ Brake Master Cylinder for 2005 Cadillac SRX
PartNumber: 130.62138Product Specifications- UPC: 805890243731
- Part Description: 2005 Cadillac SRX Premium™ Brake Master Cylinder
Vehicle Fitment- 2005 Cadillac SRX | All Trims | All Engines
Cardone Reman® Remanufactured Master Cylinder for 2005 Cadillac SRX
PartNumber: 10-3161Product Specifications- Notes: Supplied w/o Reservoir
- Bore Diameter (N): 1.00"
- E-Waste: No
- Installation Hardware Included: No
- Master Cylinder Color/Finish: Gray
- Master Cylinder Material: Aluminum
- Mounting Hole Quantity: 2
- Package Contents: Master Cylinder, Reservoir Pin Kit
- Port Quantity: 2
- Primary Port Size: 1/2 x 20
- Product Condition: Remanufactured
- Reservoir Included: No
- Secondary Port Size: 1/2 x 20
- UPC: 082617693455
- Part Description: 2005 Cadillac SRX Remanufactured Master Cylinder
Vehicle Fitment- 2005 Cadillac SRX | All Trims | All Engines
FAQ for Brake Master Cylinder Repair
Q: What should be done before installing the master cylinder reservoir cap and diaphragm?
A:
You should remove the transparent hoses from the master cylinder reservoir.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Master Cylinder Fluid Level Sensor?
A:
Disconnect the electrical connector from the brake fluid level sensor. Using needle nose pliers carefully depress the retaining tabs on the end of the brake fluid level sensor and press the sensor through the reservoir to remove it.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the Master Cylinder Fluid Level Sensor?
A:
Align the brake fluid level sensor to the master cylinder reservoir. Press the brake fluid level sensor into the master cylinder reservoir. Connect the electrical connector to the brake fluid level sensor.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the brake pipe fittings at the master cylinder?
A:
The recommended torque is 38 N.m (28 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: What should you do before servicing the Master Cylinder Reservoir?
A:
You should remove the master cylinder from the vehicle.
By Bob
GM Specialist
01/11/2022Q: What should be noticed when servicing the Master Cylinder?
A:
Install a rubber cap or plug to the exposed brake pipe fitting end to prevent brake fluid loss and contamination.
By Bob
GM Specialist
01/11/2022Q: How do you install the reservoir onto the master cylinder?
A:
You can install the reservoir onto the master cylinder by pressing straight down by hand until the pin holes are aligned.
By Bob
GM Specialist
01/11/2022Q: What should be done before servicing the Master Cylinder?
A:
You should remove the brake master cylinder from the vehicle.
By Bob
GM Specialist
01/11/2022Q: What should you do before filling the Master Cylinder Reservoir?
A:
You should visually inspect the brake fluid level through the brake master cylinder reservoir.
By Bob
GM Specialist
01/11/2022See more FAQs (4)