< Back ×
2005 Cadillac SRX Hood Latch
My Vehicle Change Vehicle
2005 Cadillac SRX
< Back to View All
Hoods
- Department
- Prices
Product Specifications- Other Names: Lock
- Item Dimensions: 6.7 x 6.1 x 4.3 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Cadillac SRX Lock
Vehicle Fitment- 2005 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
FAQ for Hood Latch Repair
Q: What is the recommended torque for the fasteners?
A:
The recommended torque is 9 N.m (80 lb in).
By Bob
GM Specialist
01/11/2022Q: What should be done before servicing the Hood Hinge?
A:
You should open and support the hood.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the bolts?
A:
The recommended torque is 24 N.m (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Seal?
A:
Remove the push-in retainers. Using a trim pad clip removal tool, carefully work the seal off the hood from side to side. Remove the front hood seal from the hood.
By Bob
GM Specialist
01/11/2022Q: What should be done before servicing the Hood Latch?
A:
You should remove the bolts that secure the hood latch to the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the Seal?
A:
Position the front hood seal to the hood and install the push-in retainers to secure the front hood seal to the hood.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the Hood Bumper?
A:
Position the hood bumpers to the opening in the upper tie bar, and turn the hood bumpers clockwise until the height of 16 mm (5/8 in) is achieved.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Hood Bumper?
A:
Open the hood, and remove the front hood bumpers from the vehicle by turning counterclockwise.
By Bob
GM Specialist
01/11/2022See more FAQs (3)