< Back ×
2005 Chevrolet Aveo Oxygen Sensor
My Vehicle Change Vehicle
2005 Chevrolet Aveo
< Back to View All
Oxygen Sensors
- Department
- Product Fit
- Brands
- Prices
Product Specifications- Notes: OE Quality Replacement Sensor
- Connector Gender: Female
- Installation Type: Screw
- O2 Sensor Configuration: Direct Fit
- Position: Upstream
- Sensor Type: Heated
- Thread Diameter: 0.71" (18 mm)
- UPC: 042511113022
- Wire Harness Length: 15.75" (400.1 mm)
- Wires Quantity: 4 Wire Leads
- Part Description: 2005 Chevrolet Aveo Oxygen Sensor
Vehicle Fitment- 2005 Chevrolet Aveo | All Trims | 4 Cyl 1.6L
Product Specifications- Notes: 16in Length
- Connector Shape: Flat
- Position: Rear
- Terminal Quantity: 4
- Terminal Type: Blade
- UPC: 689604145364
- Wire Harness Length: 16" (400 mm)
- Wrench Size: 0.88" (22 mm)
- Part Description: 2005 Chevrolet Aveo Oxygen Sensor
Vehicle Fitment- 2005 Chevrolet Aveo | LS | 4 Cyl 1.6L
- 2005 Chevrolet Aveo | LT | 4 Cyl 1.6L
- 2005 Chevrolet Aveo | Special Value | 4 Cyl 1.6L
Product Specifications- Notes: B1S1; OE Equivalent Design;B1S2; OE Equivalent Design
- Installation Type: Screw
- Location: B1S1
- O2 Sensor Configuration: Direct Fit
- Position: Upstream
- Thread Diameter: 0.71"(18 mm)
- UPC: 087295246535
- Wire Harness Length: 16.75" (425.5 mm)
- Wires Quantity: 4 Wire Leads
- Part Description: 2005 Chevrolet Aveo OE Type Oxygen Sensor
Vehicle Fitment- 2005 Chevrolet Aveo | All Trims | 4 Cyl 1.6L
Product Specifications- Notes: B1S2;B1S1
- Connector Gender: Female
- Overall Length: 17.83"(452.882 mm)
- Position: Upstream Driver Side
- Sensor Type: Heated
- Thread Diameter: 0.71"(18.0 mm)
- UPC: 724620043727
- Wire Gauge Measurement: 20 Gauge
- Wire Harness Length: 14.29"(362.966 mm)
- Wires Quantity: 4 Wire Leads
- Part Description: 2005 Chevrolet Aveo Premium Oxygen Sensor
Vehicle Fitment- 2005 Chevrolet Aveo | All Trims | 4 Cyl 1.6L
OEM (Genuine) 2005 Chevrolet Aveo Front Oxygen Sensor
PartNumber: 96394004$88.24 MSRP:$166.50You Save: $78.26 (48%)Product Specifications- Notes: Aveo; Front
- Other Names: Front Oxygen Sensor, Oxygen Sensor
- Item Dimensions: 5.4 x 2.2 x 2.3 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Chevrolet Aveo Front Oxygen Sensor
Vehicle Fitment- 2005 Chevrolet Aveo | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
Product Specifications- Notes: Upstream; B1S1;Downstream; B1S2
- Connector Gender: Female
- Connector Shape: Radiused Polygon
- Installation Type: Threaded
- Location: B1S1
- Overall Length: 17.83"
- Position: Downstream Passenger Side
- Sensor Type: Heated
- Thread Diameter: 18.0 mm
- UPC: 724620089725
- Wire Gauge Measurement: 20 Gauge
- Wire Harness Length: 14.29"
- Wires Quantity: 4 Wire Leads
- Part Description: 2005 Chevrolet Aveo Oxygen Sensor
Vehicle Fitment- 2005 Chevrolet Aveo | All Trims | 4 Cyl 1.6L
Product Specifications- Notes: Federal; Aveo; Rear
- Other Names: Oxygen Sensor, Rear Oxygen Sensor
- Item Dimensions: 7.2 x 2.0 x 2.0 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Chevrolet Aveo Rear Oxygen Sensor
Vehicle Fitment- 2005 Chevrolet Aveo | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
Product Specifications- Connector Gender: Male
- Connector Shape: Oval
- Installation Type: Screw
- Overall Length: 18.5" (469.9 mm)
- Position: Downstream
- Sensor Type: Heated Zirconia
- Terminal Quantity: 4
- Thread Length: M18 X 1.5 mm
- UPC: 671607157017
- Wrench Size: 0.88" (22 mm)
- Part Description: 2005 Chevrolet Aveo Oxygen Sensor
Vehicle Fitment- 2005 Chevrolet Aveo | All Trims | 4 Cyl 1.6L
FAQ for Oxygen Sensor Repair
Q: What is the removal procedure for the heated oxygen sensor (position 2)?
A:
The procedure is to disconnect the negative battery cable, disconnect the electrical connector, and remove the heated oxygen sensor 2 (HO2S2).
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque when installing the HO2S1 to the exhaust manifold?
A:
You can tighten the oxygen sensor to 42 N.m (31 lb-ft).
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the heated oxygen sensor (position 1)?
A:
The procedure is to disconnect the negative battery cable, disconnect the front heated oxygen sensor (HO2S1) connector, and remove the HO2S1 from the exhaust manifold.
By Bob
GM Specialist
02/11/2022Q: What must be replaced if an open or short exists within the flex wiring harness?
A:
The complete harness must be replaced.
By Bob
GM Specialist
02/11/2022Q: How do you install the heated oxygen sensor (position 2)?
A:
You can coat the threads of the HO2S2 with an anti-seize compound, install the HO2S2, connect the electrical connector and connect the negative battery cable.
By Bob
GM Specialist
02/11/2022