< Back ×
My Vehicle Change Vehicle
2005 Chevrolet Aveo
< Back to View All
Control Arms & Suspension Rods
- Department
- Prices
OEM (Genuine) 2005 Chevrolet Aveo Steering Knuckle Assembly
PartNumber: 96870494
Product Specifications- Notes: W/O ABS; Aveo; Right; W/O ABS
- Location: Passenger Side
- Other Names: Knuckle
- Item Dimensions: 9.9 x 9.7 x 8.2 inches
- Item Weight: 7.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 96459243
- Part Description: 2005 Chevrolet Aveo Steering Knuckle Assembly
Vehicle Fitment- 2005 Chevrolet Aveo | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
$100.40 MSRP:$174.75You Save: $74.35 (43%)
OEM (Genuine) 2005 Chevrolet Aveo Knuckle
PartNumber: 96870491
Product Specifications- Notes: W/ABS; Aveo; Left; W/ABS
- Location: Driver Side
- Other Names: Knuckle
- Item Dimensions: 9.9 x 9.7 x 8.0 inches
- Item Weight: 7.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 96535190
- Part Description: 2005 Chevrolet Aveo Knuckle
Vehicle Fitment- 2005 Chevrolet Aveo | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
$105.58 MSRP:$174.75You Save: $69.17 (40%)
OEM (Genuine) 2005 Chevrolet Aveo Steering Knuckle Assembly
PartNumber: 96870493
Product Specifications- Notes: W/O ABS; Aveo; Left; W/O ABS
- Location: Driver Side
- Other Names: Knuckle
- Item Dimensions: 9.9 x 9.8 x 8.2 inches
- Item Weight: 8.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 96459242
- Part Description: 2005 Chevrolet Aveo Steering Knuckle Assembly
Vehicle Fitment- 2005 Chevrolet Aveo | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
OEM (Genuine) 2005 Chevrolet Aveo Steering Knuckle Assembly
PartNumber: 96870492
Product Specifications- Notes: W/ABS; Aveo; Right; W/ABS
- Location: Passenger Side
- Other Names: Knuckle
- Item Dimensions: 10.7 x 8.5 x 7.0 inches
- Item Weight: 7.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 96535191
- Part Description: 2005 Chevrolet Aveo Steering Knuckle Assembly
Vehicle Fitment- 2005 Chevrolet Aveo | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
FAQ for Steering Knuckle Repair
Q: What is the removal procedure for the steering knuckle?
A:
The procedure is to remove the following: the front wheels, the caulking nut, the tie rod end from the knuckle, the control arm ball joint, the brake caliper, the brake disc, the ABS wheel speed sensor, the backing plate, the front strut bolts, and the knuckle assembly.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque when installing the knuckle assembly to the front strut with bolts and nuts?
A:
You can tighten the knuckle assembly to the front strut with bolt and nuts to 100 Nm (74 ft. lbs.).
By Bob
GM Specialist
02/11/2022