< Back ×
2005 Chevrolet Blazer Differential Seal
My Vehicle Change Vehicle
2005 Chevrolet Blazer
< Back to View All
Driveline, Axles & 4WD
- Department
- Brands
- Prices
OEM (Genuine) 2005 Chevrolet Blazer Pinion Seal
PartNumber: 26064028$31.13 MSRP:$51.55You Save: $20.42 (40%)Product Specifications- Notes: Blazer/Sonoma/S10
- Other Names: Pinion Seal
- Item Dimensions: 3.9 x 4.0 x 0.6 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Chevrolet Blazer Pinion Seal
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
Product Specifications- Notes: 1.500" Shaft; w/7.62" Ring Gear
- Bore: 2.656"
- Boretite: No
- Outer Diameter: 2.66"
- Shaft: 1.5240"
- UPC: 085311308243
- Width: 0.607"
- Part Description: 2005 Chevrolet Blazer Rear Differential Pinion Seal
Vehicle Fitment- 2005 Chevrolet Blazer | All Trims | All Engines
OEM (Genuine) 2005 Chevrolet Blazer Pinion Seal
PartNumber: 12471523$13.45 MSRP:$24.45You Save: $11.00 (45%)Product Specifications- Notes: S-Series
- Other Names: Pinion Seal
- Item Dimensions: 4.5 x 4.6 x 0.9 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Chevrolet Blazer Pinion Seal
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
Product Specifications- Notes: 7.25" Ring Gear
- Bore: 2.656"
- Boretite: No
- Outer Diameter: 2.66"
- Shaft: 1.520"
- UPC: 085311015523
- Width: 0.425"
- Part Description: 2005 Chevrolet Blazer Front Differential Pinion Seal
Vehicle Fitment- 2005 Chevrolet Blazer | All Trims | All Engines
Product Specifications- Notes: 7.50" Ring Gear;Triple Lib; w/7.62" Ring Gear
- Bore: 2.653"
- Boretite: No
- Outer Diameter: 2.658"
- Shaft: 1.7320"
- UPC: 085311373609
- Width: 0.547"
- Part Description: 2005 Chevrolet Blazer Rear Differential Pinion Seal
Vehicle Fitment- 2005 Chevrolet Blazer | All Trims | All Engines
FAQ for Differential Seal Repair
Q: What kind of special tools will be required in the replacement of the Front Differential Drive Pinion Flange Yoke, Seal, and Dust Deflector?
A:
J33782 Pinion Seal Installer, J8614-01 Flange, and Pulley Holding Tool.
By Bob
GM Specialist
29/10/2022Q: What should be noted when removing the propeller shaft?
A:
When removing the propeller shaft, do not attempt to remove the shaft by pounding on the yoke ears or using a tool between the yoke and the universal joint. If the propeller shaft is removed by using such means, the injection joints may fracture and lead to premature failure of the joint.
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the yoke retainer bolts?
A:
The recommended torque is 20 Nm (15 ft. lbs.).
By Bob
GM Specialist
29/10/2022