< Back ×
My Vehicle Change Vehicle
2005 Chevrolet Blazer
< Back to View All
Oil Filters, Pans, Pumps & Related Parts
- Department
- Prices
OEM (Genuine) 2005 Chevrolet Blazer Adapter
PartNumber: 10236272
Product Specifications- Notes: 4WD, To Filter
- Other Names: Adapter
- Item Dimensions: 7.9 x 5.9 x 5.7 inches
- Item Weight: 2.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10236276, 12551415
- Part Description: 2005 Chevrolet Blazer Adapter
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
$104.05 MSRP:$165.22You Save: $61.17 (38%)
OEM (Genuine) 2005 Chevrolet Blazer Adapter
PartNumber: 93802307
Product Specifications- Notes: S-Series; 4WD; 4WD, To Block
- Other Names: Adapter, Oil Cooler
- Item Dimensions: 4.4 x 4.3 x 4.2 inches
- Item Weight: 1.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12562825, 12558735, 12554577
- Part Description: 2005 Chevrolet Blazer Adapter
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
OEM (Genuine) 2005 Chevrolet Blazer Adapter
PartNumber: 12562827
Product Specifications- Notes: S-Series; 2WD; 2WD
- Other Names: Adapter, Oil Cooler
- Item Dimensions: 6.0 x 5.5 x 5.4 inches
- Item Weight: 1.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12551735, 12558738
- Part Description: 2005 Chevrolet Blazer Adapter
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
FAQ for Oil Filter Adapter Repair
Q: How to remove the Remote Oil Filter Adapter?
A:
You need to position a suitable container to catch the engine oil, remove the engine oil filter, the engine oil cooler pipes, the remote oil filter inlet and outlet hoses, then remove the nuts and the remote oil filter adapter from the remote oil filter mounting bracket.
By Bob
GM Specialist
02/11/2022Q: What are the recommended torque for the remote oil filter inlet and outlet hose to the remote oil filter adapter bolt?
A:
The recommended torque is 35 Nm (26 ft. lbs.).
By Bob
GM Specialist
02/11/2022Q: How to remove the Oil Filter Bypass Valve?
A:
You need to position a suitable container to catch the engine oil, remove the oil filter, remove the oil filter adapter, remove the oil filter bypass valve, and clean and inspect the valve bore for damage.
By Bob
GM Specialist
02/11/2022Q: How to install the Oil Filter Adapter?
A:
You need to install the new oil filter adapter seal (O-ring) into the groove on the oil filter adapter, install the oil filter adapter and a new oil filter adapter gasket, install the oil filter adapter bolts, install the oil filter adapter pipe seals and pipes to the oil filter adapter, and the oil filter adapter pipe bolt, the engine oil filter, operate the engine and check for leaks, then inspect the engine oil level and fill to the proper level.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the oil filter adapter pipe bolt?
A:
The recommended torque is 35 Nm (26 ft. lbs.).
By Bob
GM Specialist
02/11/2022Q: Can you reuse the seals in the installation?
A:
No, you should install the new seals on both ends of the remote oil filter inlet and outlet hoses.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the remote oil filter adapter nuts?
A:
The recommended torque is 25 Nm (18 ft. lbs.).
By Bob
GM Specialist
02/11/2022See more FAQs (2)