< Back ×
2005 Chevrolet Blazer Transfer Case Output Shaft Seal
My Vehicle Change Vehicle
2005 Chevrolet Blazer
< Back to View All
Transfer Cases
- Department
- Location
- Brands
- Prices
$19.99Product Specifications- Notes: New Process 236
- Bore: 2.697"
- Boretite: No
- Outer Diameter: 2.707"
- Shaft: 1.890"
- UPC: 085311355544
- Width: 0.433"
- Part Description: 2005 Chevrolet Blazer Rear Transfer Case Output Shaft Seal
Vehicle Fitment- 2005 Chevrolet Blazer | All Trims | All Engines
$25.88Product Specifications- Notes: Boot Type; w/1.400in Width; w/New Process 236C Transfer Case; 2Spd; Full Time 4WD;Boot Type; w/1.400in Width; w/New Process 136C Transfer Case; 1Spd; w/Part Time 4WD
- Inside Diameter: 47.900 mm
- Outside Diameter: 68.600 mm
- Sealing Material: Fluoro-Elastomer
- Thickness: 11.900 mm
- Part Description: 2005 Chevrolet Blazer Rear Transfer Case Output Shaft Seal
Vehicle Fitment- 2005 Chevrolet Blazer | All Trims | All Engines
$12.45Product Specifications- Notes: w/New Process 136C Transfer Case; 1Spd; w/Part Time 4WD;w/New Process 236C Transfer Case; 2Spd; Full Time 4WD
- Type: 40
- Part Description: 2005 Chevrolet Blazer Front Transfer Case Output Shaft Seal
Vehicle Fitment- 2005 Chevrolet Blazer | All Trims | All Engines
$81.73 MSRP:$135.28You Save: $53.55 (40%)Product Specifications- Notes: Models 236
- Other Names: Extension Seal, Output Shaft Seal
- Item Dimensions: 3.8 x 4.0 x 1.6 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Chevrolet Blazer Extension Seal
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, ZR2 | 6 Cyl 4.3 L GAS
FAQ for Transfer Case Output Shaft Seal Repair
Q: What kind of special tools will be required when serving the Transfer Case Output Shaft Seal - Front?
A:
J33843 Front Output Shaft Seal Installer.
By Bob
GM Specialist
01/11/2022Q: How to install the new rear output shaft bushing?
A:
First, you need to install the bushing or the finger section of the J 45380, next install the finger section to the main body of the J 45380, then position the bushing and tool to the case, and lastly install the bushing.
By Bob
GM Specialist
01/11/2022Q: What kind of special tools will be required when serving the Transfer Case Output Shaft Seal - Rear?
A:
J33843 Output Shaft Seal Installer, J 45380 Transfer Case Rear Bushing Remover, and Installer.
By Bob
GM Specialist
01/11/2022Q: How to remove the Transfer Case Output Shaft Seal - Front?
A:
You need to remove the transfer case shield, the front propeller shaft, the dust seal from the front output shaft, the output shaft retaining ring, and the front output shaft seal.
By Bob
GM Specialist
01/11/2022