< Back ×
2005 Chevrolet Cavalier A/C Accumulator
My Vehicle Change Vehicle
2005 Chevrolet Cavalier
< Back to View All
A/C & Heating
- Department
- Brands
- Prices
$19.31Product Specifications- Body Diameter: 3.500
- Body Length: 8.000
- Dia. MM: 88.900
- Inlet Fitting Diameter: 3/4
- Inlet Fitting Type: Dual O-Ring
- Inlet Thread Size: M27x2.000
- Length MM: 203.200
- Material: Aluminum
- Meets / Exceeds OEM: Yes
- Mounting Hardware: Hardware not included.
- O-Ring A Number/Desc: [24222] / Spring
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24672] / Green O-Ring
- O-Ring B Quantity: 3
- O.E. Replacement: Yes
- Outlet Fitting Type: Dual O-Ring
- Outlet Fraction: 3/4
- Outlet Thread Size: M27x2.000
- Style: Complete Unit
- Switch: w/o Switch Port
- Switch Service Port: w/o Service Port
- UPC: 096361830004
- Part Description: 2005 Chevrolet Cavalier A C Accumulator
Vehicle Fitment- 2005 Chevrolet Cavalier | All Trims | All Engines
$23.82Product Specifications- UPC: 671607160864
- Part Description: 2005 Chevrolet Cavalier A/C Accumulator
Vehicle Fitment- 2005 Chevrolet Cavalier | All Trims | All Engines
$24.79 MSRP:$42.76You Save: $17.97 (43%)Product Specifications- Notes: Cavalier, Sunfire
- Other Names: Drier
- Item Dimensions: 9.5 x 8.9 x 5.1 inches
- Item Weight: 1.50 Pounds
- Replaces: 2724908, 01132774, 02724908, 1132774
- Part Description: 2005 Chevrolet Cavalier Drier
Vehicle Fitment- 2005 Chevrolet Cavalier | Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
Product Specifications- Other Names: Dehydrator
- Item Dimensions: 9.6 x 8.9 x 5.0 inches
- Item Weight: 1.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Chevrolet Cavalier Dehydrator
Vehicle Fitment- 2005 Chevrolet Cavalier | Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
FAQ for A/C Accumulator Repair
Q: How do you install the accumulator (L61)?
A:
You can install the accumulator, install the accumulator bracket clamp, install new O-ring seals to refrigerant lines, install the refrigerant lines to the accumulator, install the accumulator tube to the accumulator and compressor tube to accumulator fitting nuts, position the bracket holding the PCM module on to the shock tower, install the bracket nuts holding the PCM module on to the shock tower, reposition the cruise control bracket, evacuate and recharge the A/C system and leak test the fittings of the component.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the accumulator (L61)?
A:
The procedure is to recover the refrigerant, reposition the cruise control bracket, remove the 2 nuts holding the bracket for the PCM module, remove the refrigerant tubes from the accumulator, discard the O-ring seals, remove the accumulator bracket and remove the accumulator.
By Bob
GM Specialist
01/11/2022