< Back ×
My Vehicle Change Vehicle
2005 Chevrolet Cavalier
< Back to View All
A/C & Heating
- Department
- Prices
OEM (Genuine) 2005 Chevrolet Cavalier AC Hose
PartNumber: 22661210
Product Specifications- Notes: 2.2 Liter, W/DOHC
- Other Names: AC Hose, Suction Hose
- Item Dimensions: 20.3 x 15.6 x 6.0 inches
- Item Weight: 1.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Chevrolet Cavalier AC Hose
Vehicle Fitment- 2005 Chevrolet Cavalier | Base, LS, LS Sport | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS
$102.91 MSRP:$194.18You Save: $91.27 (48%)
OEM (Genuine) 2005 Chevrolet Cavalier Evaporator Tube
PartNumber: 19244814
Product Specifications- Notes: To Evaporator
- Other Names: AC Tube, Evaporator Tube
- Item Dimensions: 34.8 x 15.7 x 4.6 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22696601, 22634102, 22653404, 22639673, 22623386
- Part Description: 2005 Chevrolet Cavalier Evaporator Tube
Vehicle Fitment- 2005 Chevrolet Cavalier | Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
$36.34 MSRP:$65.80You Save: $29.46 (45%)
OEM (Genuine) 2005 Chevrolet Cavalier Tube Asm-A/C Accumulator
PartNumber: 22638841
Product Specifications- Notes: To Drier
- Other Names: AC Tube, Accumulator Tube
- Item Dimensions: 13.9 x 5.5 x 3.3 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Chevrolet Cavalier Tube Asm-A/C Accumulator
Vehicle Fitment- 2005 Chevrolet Cavalier | Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
FAQ for A/C Hose Repair
Q: How do you install the accumulator tube?
A:
You can install new O-rings, install the accumulator tube, install the accumulator tube fitting nuts, reposition the cruise control module, position the bracket holding the PCM module onto the shock tower, install the bracket nuts holding the PCM module onto the shock tower, evacuate and recharge the A/C system and leak test the fittings of the component.
By Bob
GM Specialist
28/10/2022Q: What is the first step for replacing the compressor hose assembly (L61)?
A:
The first step is to recover the refrigerant.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque when installing the compressor hose assembly and the fitting nut to the accumulator?
A:
You can tighten the fitting nut to 35 Nm (26 lb-ft).
By Bob
GM Specialist
28/10/2022Q: How do you install the evaporator tube?
A:
You can install the evaporator tube, raise the vehicle, install the evaporator tube to the evaporator, lower the vehicle, install the tube to the retraining clip, install the evaporator tube to the condenser, install the accumulator tube, install the coolant surge tank hoses, install the hood close out filler panel, evacuate and charge the A/C system and leak test the fittings of the component.
By Bob
GM Specialist
28/10/2022Q: How do you replace the evaporator tube?
A:
You can recover the refrigerant, remove the hood close-out filler panel, remove the coolant surge tank hoses, remove the nut connecting the evaporator tube to the condenser, discard the O-ring seal, remove the tube from the retaining clip and the accumulator tube, raise the vehicle, remove the evaporator tube from the evaporator, discard the O-ring seals, lower the vehicle and remove the evaporator tube.
By Bob
GM Specialist
28/10/2022Q: How do you replace the accumulator tube?
A:
You can recover the refrigerant, reposition the cruise control module out of the way, remove the 2 nuts holding the bracket for the PCM Module, remove the accumulator tube fitting nut, remove the accumulator tube fitting nut, remove the accumulator tube and remove and discard the O-rings.
By Bob
GM Specialist
28/10/2022See more FAQs (1)