< Back ×
My Vehicle Change Vehicle
2005 Chevrolet Cavalier
< Back to View All
Brake Drums & Brake Shoes
- Department
- Series
- Brands
- Prices
Centric® Premium Rear Brake Drum for 2005 Chevrolet Cavalier
PartNumber: 122.62034Product Specifications- UPC: 805890194484
- Part Description: 2005 Chevrolet Cavalier Premium Rear Brake Drum
Vehicle Fitment- 2005 Chevrolet Cavalier | All Trims | All Engines
$39.64
DuraGo® Rear Brake Drum for 2005 Chevrolet Cavalier
PartNumber: BD80107Product Specifications- Abs Sensor Ring Includes: No
- Bolt Circle Diameter: 100mm (3.94")
- Bolt Hole Diameter: 15mm (0.59")
- Bolt Hole Quantity: 5
- Brake Surface Width: 53.7mm (2.11")
- Center Hole Diameter: 57.8mm (2.28")
- Construction: Composite
- Drum Type: Floating
- Height: 69.8mm (2.75")
- Maximum Diameter: 230.89mm (9.09")
- Nominal Diameter: 230mm (9.06")
- Outside Diameter: 271mm (10.67")
- Type: Plain Cooling Fins
- UPC: 756632126341
- Part Description: 2005 Chevrolet Cavalier Rear Brake Drum
Vehicle Fitment- 2005 Chevrolet Cavalier | All Trims | All Engines
$37.93
OEM (Genuine) 2005 Chevrolet Cavalier Drum
PartNumber: 22696503
Product Specifications- Location: Passenger Side; Driver Side
- Other Names: Drum
- Item Dimensions: 4.1 x 13.5 x 12.2 inches
- Item Weight: 11.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Chevrolet Cavalier Drum
Vehicle Fitment- 2005 Chevrolet Cavalier | Base, LS, LS Sport | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS
brembo® Premium OE Equivalent Rear Brake Drum for 2005 Chevrolet Cavalier
PartNumber: 14.B641.10Product Specifications- Center Diameter: 57.6
- Depth [mm]: 54.35
- Diameter (mm): 230
- Height: 69.85
- Material: Grey Cast Iron
- Maximum Diameter: 231
- Number of Holes: 5
- Quantity: 5
- Part Description: 2005 Chevrolet Cavalier Premium OE Equivalent Rear Brake Drum
Vehicle Fitment- 2005 Chevrolet Cavalier | Base | All Engines
- 2005 Chevrolet Cavalier | LS | All Engines
- 2005 Chevrolet Cavalier | LS Sport | All Engines
FAQ for Brake Drum Repair
Q: What is the removal procedure for the drum brake adjusting hardware?
A:
The procedure is to raise the vehicle, remove the tire and wheel assembly, remove the brake drum, remove the adjuster spring, remove the adjuster actuator lever, spread the top of the brake shoes apart, remove the adjuster assembly, inspect the adjuster assembly and replace the adjuster assembly.
By Bob
GM Specialist
01/11/2022Q: How do you install the drum brake adjusting hardware?
A:
You can spread the top of the brake shoes apart, install the adjuster assembly, install the adjuster actuator lever to the pivot and the adjuster assembly, install the adjuster spring, adjust the drum brakes, install the brake drum, install the tire and wheel assembly and lower the vehicle.
By Bob
GM Specialist
01/11/2022Q: What tool can you thoroughly clean any corrosion/rust from the brake drum flange?
A:
You can use the J 41013.
By Bob
GM Specialist
01/11/2022Q: What tool can you use to thoroughly clean any corrosion from the wheel bearing flange?
A:
You can use the J 42450-A.
By Bob
GM Specialist
01/11/2022Q: How do you replace the brake drum?
A:
You can check to ensure that the parking brake is fully released, raise the vehicle, remove the tire and wheel assembly, remove the brake drum, clean any rust or corrosion from the hub/flange mating surface of the brake drum, remove any corrosion from the edge of the drum braking surface and clean the wheel hub flange.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the drum brake hardware?
A:
The procedure is to raise the vehicle, remove the tire and wheel assembly, remove the brake drum, position the hook end of the J 38400 under the universal spring, pull the universal spring end out of the shoe web hole, and remove the universal spring.
By Bob
GM Specialist
01/11/2022Q: How do you install the drum brake hardware?
A:
You can install the universal spring, position the hook end of the J 38400 under the universal spring, pull the universal spring end out, install the brake drum, install the tire and wheel assembly and lower the vehicle.
By Bob
GM Specialist
01/11/2022Q: What should you insert while holding the J 21177-A in position?
A:
You should insert a 0.635 mm (0.025 inches) feeler gauge between one side of the J 21177-A and the corresponding brake shoe.
By Bob
GM Specialist
01/11/2022Q: What is the first step for adjusting the drum brake?
A:
The first step is to release the tension from the park brake cable system.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the brake drum?
A:
You can adjust the drum brakes, install the brake drum, install the tire and wheel assembly, apply the brakes approximately three times and lower the vehicle.
By Bob
GM Specialist
01/11/2022See more FAQs (5)