2005 Chevrolet Cavalier Transmission Mount

You can tighten the thru bolt to 60 Nm (44 lb-ft).

The procedure is to loosen the rear transaxle mount bolts, raise the vehicle, support the transaxle, remove the rear transaxle mount through-bolt, remove the rear transaxle mount bolts and remove the rear transaxle mount.

You can transfer the mount bracket to the new mount, position the mount and start the bolts into the threads, tighten the mount bolts, install the mount expansion bolt, remove the jack stand and the wood block, install the left fender liner, install the left tire and wheel assembly and lower the vehicle.

You can position the rear transaxle, start the rear transaxle mount bolts, install the transaxle mount through-bolt, remove the wood block and the jack stand from under the transaxle, lower the vehicle and install the rear bolts.

The procedure is to remove the washer solvent container, raise the vehicle, remove the left front wheel and tire assemblies, remove the left front fender liners, position a block of wood and a jack stand to support the transaxle, remove the transaxle mount through-bolt, remove the transaxle to engine block bolts and remove the front transaxle mount.