< Back ×
2005 Chevrolet Classic Hood Latch
My Vehicle Change Vehicle
2005 Chevrolet Classic
< Back to View All
Hoods
- Department
- Prices
Product Specifications- Other Names: Latch, Lock
- Item Dimensions: 6.3 x 5.8 x 4.6 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22602520
- Part Description: Latch Asm-Hood Primary & Secondary
FAQ for Hood Latch Repair
Q: What is the recommended torque for the hood latch striker bolts?
A:
The recommended torque is 25 N.m (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the hood latch support nuts?
A:
The recommended torque is 25 N.m (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the Seal?
A:
Install the hood rear weatherstrip to the pinch weld flange, press the weatherstrip to the pinch flange until fully seated, and close the hood.
By Bob
GM Specialist
01/11/2022Q: What should be done before servicing the Hood Hinge?
A:
You should remove the air inlet grille before servicing the Hood Hinge.
By Bob
GM Specialist
01/11/2022Q: What should be done before servicing the Hood Latch Support?
A:
You should remove the grille before servicing the Hood Latch Support.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Hood Latch Striker?
A:
Open the hood, mark the location of the hood latch striker on the hood, and remove the hood latch striker.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the hood latch bolts?
A:
The recommended torque is 10 N.m (97 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the lower hood hinge bolts?
A:
The recommended torque is 28 N.m (21 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Seal?
A:
Open the hood, and remove the hood rear weatherstrip from the pinch weld flange.
By Bob
GM Specialist
01/11/2022Q: What should be done before servicing the Hood Latch?
A:
You should open the hood before servicing the Hood Latch.
By Bob
GM Specialist
01/11/2022See more FAQs (7)