< Back ×
2005 Chevrolet Colorado Crankshaft Seal
My Vehicle Change Vehicle
2005 Chevrolet Colorado
< Back to View All
Crankshafts, Pistons, Rings & Connecting Rods
- Department
- Prices
OEM (Genuine) 2005 Chevrolet Colorado Front Cover Seal
PartNumber: 89017622$16.71 MSRP:$27.62You Save: $10.91 (40%)Product Specifications- Notes: 2.8 & 2.9 Liter; 3.5 & 3.7 Liter
- Item Dimensions: 6.1 x 6.2 x 0.5 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Chevrolet Colorado Front Cover Seal
Vehicle Fitment- 2005 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
OEM (Genuine) 2005 Chevrolet Colorado Rear Main Seal
PartNumber: 89018205$21.96 MSRP:$36.37You Save: $14.41 (40%)Product Specifications- Notes: Canyon, Colorado
- Other Names: Rear Main Seal
- Item Dimensions: 4.2 x 4.1 x 1.1 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12568124
- Part Description: 2005 Chevrolet Colorado Rear Main Seal
Vehicle Fitment- 2005 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
Product Specifications- Notes: Canyon, Colorado
- Other Names: Rear Main Seal Retainer
- Item Dimensions: 19.9 x 14.4 x 3.4 inches
- Item Weight: 3.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12580519
- Part Description: 2005 Chevrolet Colorado Rear Main Seal Retainer
Vehicle Fitment- 2005 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
Product Specifications- Notes: Canyon, Colorado
- Part Description: 2005 Chevrolet Colorado Crankshaft Seal
Vehicle Fitment- 2005 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 5 Cyl 3.5 L GAS
FAQ for Crankshaft Seal Repair
Q: How do you remove the crankshaft rear oil seal and housing?
A:
You should remove the flywheel, the 2 bolts securing the oil pan to the crankshaft rear oil seal housing, and the crankshaft rear oil seal housing bolts, install 2 bolts into the threaded holes to act as jack screws and tighten evenly to release the crankshaft rear oil seal housing from the engine block and oil pan, and remove the crankshaft rear oil seal housing and the 2 bolts from the jack screw holes.
By Bob
GM Specialist
29/10/2022Q: How do you remove the crankshaft oil seal?
A:
You should remove the crankshaft balancer and pry out the crankshaft front oil seal using a suitable tool.
By Bob
GM Specialist
29/10/2022Q: How do you install the crankshaft rear oil seal and housing?
A:
You should install the crankshaft rear oil seal housing bolts, the 2 oil pan bolts, and the flywheel.
By Bob
GM Specialist
29/10/2022Q: How do you install the crankshaft oil seal?
A:
You should apply the engine oil to the outside diameter of the crankshaft front oil seal, use the J 45951 to install the new crankshaft front oil seal, remove the J 45951 and install the crankshaft balancer.
By Bob
GM Specialist
29/10/2022