< Back ×
My Vehicle Change Vehicle
2006 Chevrolet Cobalt
< Back to View All
Cooling Systems, Fans & Radiators
- Department
- Prices
OEM (Genuine) 2006 Chevrolet Cobalt Shroud
PartNumber: 15849632
Product Specifications- Notes: 2.2 Liter
- Other Names: Shroud
- Item Dimensions: 32.3 x 16.8 x 8.2 inches
- Item Weight: 6.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22731541
- Part Description: 2006 Chevrolet Cobalt Shroud
Vehicle Fitment- 2006 Chevrolet Cobalt | Base, LS, LT, LTZ | 4 Cyl 2.2 L GAS
$165.71 MSRP:$263.11You Save: $97.40 (38%)
OEM (Genuine) 2006 Chevrolet Cobalt Fan Shroud
PartNumber: 15849644
Product Specifications- Notes: 2.4 Liter; Cobalt; 2.4L
- Other Names: Fan Assembly, Fan Module, Fan Shroud
- Item Dimensions: 33.6 x 18.1 x 9.6 inches
- Item Weight: 13.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 Chevrolet Cobalt Fan Shroud
Vehicle Fitment- 2006 Chevrolet Cobalt | Sport, SS | 4 Cyl 2.4 L GAS
$189.66 MSRP:$357.86You Save: $168.20 (48%)
OEM (Genuine) 2006 Chevrolet Cobalt Fan Shroud
PartNumber: 19417092
Product Specifications- Notes: 2.2 Liter; Cobalt; 2.2L
- Other Names: Fan Assembly, Fan Module, Fan Shroud
- Item Dimensions: 34.6 x 21.9 x 7.7 inches
- Item Weight: 6.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25784022, 20824475, 15849635, 15211556
- Part Description: 2006 Chevrolet Cobalt Fan Shroud
Vehicle Fitment- 2006 Chevrolet Cobalt | Base, LS, LT, LTZ | 4 Cyl 2.2 L GAS
$359.55 MSRP:$678.42You Save: $318.87 (48%)
OEM (Genuine) 2006 Chevrolet Cobalt Shroud Pkg, Engine Coolant Fan
PartNumber: 22697113
Product Specifications- Notes: 2.0 Liter Supercharged; Cobalt; 2.0L
- Other Names: Fan Shroud, Shroud
- Item Dimensions: 32.6 x 18.7 x 11.5 inches
- Item Weight: 5.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 Chevrolet Cobalt Shroud Pkg, Engine Coolant Fan
Vehicle Fitment- 2006 Chevrolet Cobalt | SS | 4 Cyl 2.0 L GAS
FAQ for Cooling Fan Shroud Repair
Q: What is the recommended torque for the cooling fan motor and bolts?
A:
The recommended torque is 8 Nm (70-inch lbs.).
By Bob
GM Specialist
01/11/2022Q: How to install the Cooling Fan and Shroud (2.2L (L61), 2.4L (LE5)?
A:
You need to install the cooling fan assembly, verify that the upper radiator mounts are installed in the vehicle, verify that the upper radiator mount pins align with the upper radiator mounts, install the lower radiator mounts, brackets, and bolts, install the right and left engine splash shield to radiator mount push-in retainer, install the air dam and the push-in retainers, align the cooling fan shroud retaining features to the radiator, pull down on the cooling fan assembly to snap the shroud onto the radiator, connect the cooling fan electrical connector, and install the cooling fan wire to the fan shroud.
By Bob
GM Specialist
01/11/2022Q: How to remove the Fan Shroud?
A:
You need to remove the cooling fan assembly, scribe the position of each of the cooling fan blades on the cooling fan motor shaft, remove the cooling fan blade retaining clips and discard, remove the cooling fan blade, and the cooling fan motor bolts and remove the cooling fan motor.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the lower radiator bolts?
A:
The recommended torque is 25 Nm (18 ft. lbs.).
By Bob
GM Specialist
01/11/2022