Search Bar
Search by Part Number, Part Name, or Vehicle
  • My Garage
  • Cart
  • OE Parts
  • Body & Mirrors
  • Chassis & Brakes
  • Engine & Drivetrain
  • Electrical & Lighting
Help Center
< Back ×
  • Shop OE Parts
  • Shop By Category
  • Body & Mirrors
  • Chassis & Brakes
  • Engine & Drivetrain
  • Electrical & Lighting

2006 Chevrolet Cobalt Radiator Drain Plugs

My Vehicle Change Vehicle
2006 Chevrolet Cobalt
Change Vehicle
Vehicle Options
We need more information about your vehicle to make a correct determination of fitment
< Back to View All
Cooling Systems, Fans & Radiators
  • Department
  • Prices

1 Product found

2 Q&A for Radiator Drain Plugs Repair
Sort by:
Recommended
Filter Results
Sort
View by
  • OEM 2006 Chevrolet Cobalt Radiator Drain Plug - 13267636
    OEM 2006 Chevrolet Cobalt Radiator Drain Plug Diagram - 13267636
    View Related Parts

    OEM (Genuine) 2006 Chevrolet Cobalt Radiator Drain Plug

    PartNumber: 13267636
    $10.62 MSRP: $15.99
    You Save: $5.37 (34%)
    Product Specifications
    • Notes: 2.2 Liter; 2.0 Liter Supercharged; 2.4 Liter, 2006 W/Engine Oil Cooler; 2.4 Liter, 2006-08 W/O Engine Oil Cooler
    • Other Names: Drain Plug, Radiator Drain Plug
    • Item Dimensions: 2.0 x 1.0 x 1.1 inches
    • Item Weight: 0.30 Pounds
    • Fitment Type: Direct Replacement
    • Replaces: 52482151, 52461346, 10368798
    • Part Description: 2006 Chevrolet Cobalt Radiator Drain Plug
    More Info
    Vehicle Fitment
    • 2006 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

FAQ for Radiator Drain Plugs Repair

Q: How to install the Drain Cock?
A:
You need to install the radiator drain cock, tighten the radiator drain cock by hand only, and fill the cooling system.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the Drain Cock?
A:
The procedure is to place a drain pan under the right side lower radiator mount and remove the radiator drain cock.
By Bob
GM Specialist
01/11/2022

FAQ for Other Repair Info

Q: How to remove the Auxiliary Water Pump Inlet Hose?
A:
You need to drain the cooling system, compress the auxiliary Water Pump inlet hose clamp at the charge air cooler pump, remove the auxiliary water pump inlet hose from the charge air cooler pump, compress the auxiliary water pump inlet hose clamp at the charge air cooler radiator, and remove the auxiliary water pump inlet hose from the charge air cooler radiator.
Q: How to install the Cooling Fan and Shroud (2.2L (L61), 2.4L (LE5)?
A:
You need to install the cooling fan assembly, verify that the upper radiator mounts are installed in the vehicle, verify that the upper radiator mount pins align with the upper radiator mounts, install the lower radiator mounts, brackets, and bolts, install the right and left engine splash shield to radiator mount push-in retainer, install the air dam and the push-in retainers, align the Cooling Fan Shroud retaining features to the radiator, pull down on the cooling fan assembly to snap the shroud onto the radiator, connect the cooling fan electrical connector, and install the cooling fan wire to the fan shroud.
Q: How to remove the Thermostat (RPO LE5)?
A:
You need to remove the intake manifold cover, drain the cooling system, reposition the radiator outlet hose clamp at the Thermostat cover, remove the radiator outlet hose, reposition the radiator surge tank outlet hose clamp at the thermostat cover, remove the radiator surge tank outlet hose, the thermostat cover bolts and cover, the thermostat, remove and discard the thermostat cover O-ring seal.