< Back ×
My Vehicle Change Vehicle
2006 Chevrolet Colorado
< Back to View All
Brake Pads, Discs & Calipers
- Department
- Installation Hardware Included
- Pads Included
- Series
- Brands
- Prices
Centric® Remanufactured Semi-Loaded Front Passenger Side Brake Caliper for 2006 Chevrolet Colorado
PartNumber: 141.66041Product Specifications- UPC: 805890209973
- Part Description: 2006 Chevrolet Colorado Remanufactured Semi-Loaded Front Passenger Side Brake Caliper
Vehicle Fitment- 2006 Chevrolet Colorado | All Trims | All Engines
$45.32
Cardone Reman® Remanufactured Unloaded Caliper for 2006 Chevrolet Colorado
PartNumber: 18-4938Product Specifications- Notes: Supplied without Mounting Bracket;with Phenolic Piston;Installation Hardware Included
- Bleeder Size: M10x1.5
- Bracket: without Mounting Bracket
- Caliper Color: Gray
- Caliper Configuration: Unloaded
- Inlet Port Size: M10x1.5
- Material: Iron
- Piston Material: Phenolic
- Piston Quantity: 2-Piston
- Piston Size: 45.47mm (1.79")
- Part Description: 2006 Chevrolet Colorado Remanufactured Unloaded Caliper
Vehicle Fitment- 2006 Chevrolet Colorado | All Trims | All Engines
$45.33
Centric® Remanufactured Semi-Loaded Front Driver Side Brake Caliper for 2006 Chevrolet Colorado
PartNumber: 141.66042Product Specifications- UPC: 805890209980
- Part Description: 2006 Chevrolet Colorado Remanufactured Semi-Loaded Front Driver Side Brake Caliper
Vehicle Fitment- 2006 Chevrolet Colorado | All Trims | All Engines
$45.32
Cardone Reman® Remanufactured Unloaded Caliper for 2006 Chevrolet Colorado
PartNumber: 18-4939Product Specifications- Notes: Installation Hardware Included;with Phenolic Piston;Supplied without Mounting Bracket
- Bleeder Size: M10x1.5
- Bracket: without Mounting Bracket
- Caliper Color: Gray
- Caliper Configuration: Unloaded
- Inlet Port Size: M10x1.5
- Material: Iron
- Piston Material: Phenolic
- Piston Quantity: 2-Piston
- Piston Size: 45.47mm (1.79")
- Part Description: 2006 Chevrolet Colorado Remanufactured Unloaded Caliper
Vehicle Fitment- 2006 Chevrolet Colorado | All Trims | All Engines
$45.33
Cardone Reman® Remanufactured Unloaded Caliper w/Bracket for 2006 Chevrolet Colorado
PartNumber: 18-B4938Product Specifications- Notes: Installation Hardware Included;Supplied with Mounting Bracket;with Phenolic Piston
- Bleeder Size: M10x1.5
- Bracket: With Mounting Bracket
- Caliper Color: Gray
- Caliper Configuration: Unloaded
- Inlet Port Size: M10x1.5
- Material: Iron
- Piston Material: Phenolic
- Piston Quantity: 2-Piston
- Piston Size: 45.47mm (1.79")
- Part Description: 2006 Chevrolet Colorado Remanufactured Unloaded Caliper w/Bracket
Vehicle Fitment- 2006 Chevrolet Colorado | All Trims | All Engines
$43.46
Cardone Reman® Remanufactured Unloaded Caliper w/Bracket for 2006 Chevrolet Colorado
PartNumber: 18-B4939Product Specifications- Notes: with Phenolic Piston;Installation Hardware Included;Supplied with Mounting Bracket
- Bleeder Size: M10x1.5
- Bracket: With Mounting Bracket
- Caliper Color: Gray
- Caliper Configuration: Unloaded
- Inlet Port Size: M10x1.5
- Material: Iron
- Piston Material: Phenolic
- Piston Quantity: 2-Piston
- Piston Size: 45.47mm (1.79")
- Part Description: 2006 Chevrolet Colorado Remanufactured Unloaded Caliper w/Bracket
Vehicle Fitment- 2006 Chevrolet Colorado | All Trims | All Engines
$43.46
OEM (Genuine) 2006 Chevrolet Colorado Caliper
PartNumber: 89040312
Product Specifications- Notes: W/O Z71-Off Road Pkg; 4WD; W/Z71-Off Road Pkg
- Location: Passenger Side
- Other Names: Caliper
- Item Dimensions: 9.4 x 8.4 x 6.1 inches
- Item Weight: 9.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 Chevrolet Colorado Caliper
Vehicle Fitment- 2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
OEM (Genuine) 2006 Chevrolet Colorado Caliper Asm, Front Brake
PartNumber: 89040311
Product Specifications- Notes: W/O Z71-Off Road Pkg; 4WD; W/Z71-Off Road Pkg
- Location: Driver Side
- Other Names: Caliper
- Item Dimensions: 8.7 x 15.4 x 5.1 inches
- Item Weight: 10.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 Chevrolet Colorado Caliper Asm, Front Brake
Vehicle Fitment- 2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
Centric® Posi Quiet™ Loaded Front Passenger Side Brake Caliper for 2006 Chevrolet Colorado
PartNumber: 142.66041Product Specifications- UPC: 805890582205
- Part Description: 2006 Chevrolet Colorado Posi Quiet™ Loaded Front Passenger Side Brake Caliper
Vehicle Fitment- 2006 Chevrolet Colorado | All Trims | All Engines
Centric® Posi Quiet™ Loaded Front Driver Side Brake Caliper for 2006 Chevrolet Colorado
PartNumber: 142.66042Product Specifications- UPC: 805890590125
- Part Description: 2006 Chevrolet Colorado Posi Quiet™ Loaded Front Driver Side Brake Caliper
Vehicle Fitment- 2006 Chevrolet Colorado | All Trims | All Engines
FAQ for Brake Caliper Repair
Q: What is the assembly procedure for brake caliper overhaul?
A:
The procedure is to install the piston seal in the brake caliper, install the dust seal on the piston, install the piston in the brake caliper, position a piece of wood across the piston to be installed, install the piston dust seal in the brake caliper, and then install bleeder valve cap.
By Bob
GM Specialist
29/10/2022Q: What is the proper way to install the brake rotor?
A:
The proper way is to position the wheel bearing/hub on the brake rotor, install the wheel bearing/hub mounting bolts, install the steering knuckle assembly, install the wheel bearing/hub, brake rotor assembly in the steering knuckle, and then burnish the brakes.
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the brake caliper?
A:
The procedure is to remove the tire and wheel, remove the brake hose from the brake caliper, remove the copper gaskets from the brake hose and bolt, remove the brake caliper slide pin bolts, and then remove the brake caliper from the mounting bracket.
By Bob
GM Specialist
29/10/2022Q: What is the disassembly procedure for brake caliper overhaul?
A:
The procedure is to remove the pistons from the brake caliper, remove the pistons from the caliper bores, remove the piston seals from the caliper bores, remove the bleeder valve cap, remove the bleeder valve from the caliper housing, remove the boots from the caliper bores, and then clean the brake caliper assembly with denatured alcohol.
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the brake caliper bracket?
A:
The procedure is to remove the front brake caliper, remove the brake pads from the mounting bracket, remove the mounting bolts for the brake caliper mounting bracket, and then remove the brake caliper mounting bracket.
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the disc brake hardware?
A:
The procedure is to remove the brake caliper from the mounting bracket, remove the outboard brake pad from the mounting bracket, remove the inboard and brake pad from the mounting bracket, remove guide pins from the mounting bracket, remove the guide pin seal from the mounting bracket, and then remove the brake pads shims from the mounting bracket.
By Bob
GM Specialist
29/10/2022Q: What is the proper way to install the brake caliper?
A:
The proper way is to position the brake caliper assembly on the mounting, install the guide pin bolts, install the new copper gaskets and bolt on the brake hose, install the brake hose on the brake caliper, and then install the tire and wheel.
By Bob
GM Specialist
29/10/2022Q: What is the proper way to install the brake caliper bracket?
A:
The proper way is to position the mounting bracket on the steering knuckle, install the mounting bolt bracket, install the brake pads in the mounting bracket, and then install the brake caliper.
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the brake rotor?
A:
The procedure is to inspect the brake fluid level in the brake master cylinder reservoir, remove the steering knuckle from the vehicle, remove the wheel hub/speed sensor assembly, remove the wheel hub/speed sensor to brake rotor bolts, and then separate the brake rotor from the wheel bearing/hub assembly.
By Bob
GM Specialist
29/10/2022Q: What is the proper way to install the disc brake hardware?
A:
The proper way is to install the new brake pads shims on the mounting bracket, install the guide pins in the mounting bracket, install the guide pin seal, install the inner brake pads to the mounting bracket, and then install the brake caliper assembly.
By Bob
GM Specialist
29/10/2022See more FAQs (5)