< Back ×
My Vehicle Change Vehicle
2006 Chevrolet Colorado
< Back to View All
Driveline, Axles & 4WD
- Department
- Location
- Brands
- Prices
OEM (Genuine) 2006 Chevrolet Colorado Rear Wheel Bearing
PartNumber: 12479031
Product Specifications- Notes: Canyon, Colorado
- Location: Passenger Side; Driver Side
- Item Dimensions: 3.4 x 3.4 x 1.2 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 9442126, 09442126
- Part Description: 2006 Chevrolet Colorado Rear Wheel Bearing
Vehicle Fitment- 2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$45.35 MSRP:$90.00You Save: $44.65 (50%)
National® Front Outer Differential Pinion Bearing for 2006 Chevrolet Colorado
PartNumber: M802048Product Specifications- Notes: with AAM Axle; with 8in Ring Gear
- UPC: 724956020683
- Part Description: 2006 Chevrolet Colorado Front Outer Differential Pinion Bearing
Vehicle Fitment- 2006 Chevrolet Colorado | All Trims | All Engines
$16.67
OEM (Genuine) 2006 Chevrolet Colorado Outer Pinion Bearing
PartNumber: 9417784
Product Specifications- Notes: Canyon, Colorado
- Item Dimensions: 3.0 x 3.0 x 1.1 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 Chevrolet Colorado Outer Pinion Bearing
Vehicle Fitment- 2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$37.48 MSRP:$68.16You Save: $30.68 (46%)
OEM (Genuine) 2006 Chevrolet Colorado Side Bearings
PartNumber: 25824250
Product Specifications- Notes: Canyon, Colorado
- Other Names: Side Bearings
- Item Dimensions: 4.3 x 4.1 x 2.1 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 09418390, 9418390
- Part Description: 2006 Chevrolet Colorado Side Bearings
Vehicle Fitment- 2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$70.42 MSRP:$132.88You Save: $62.46 (48%)OEM (Genuine) 2006 Chevrolet Colorado Outer Pinion Bearing
PartNumber: 23243839
Product Specifications- Notes: Canyon, Colorado
- Item Dimensions: 4.1 x 4.2 x 2.1 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26053758, 9418357, 15286375, 20997052, 22786621, 9418356, 09418356, 12479221, 09418357
- Part Description: 2006 Chevrolet Colorado Outer Pinion Bearing
Vehicle Fitment- 2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$59.95 MSRP:$113.14You Save: $53.19 (48%)
National® Rear Inner Differential Pinion Bearing for 2006 Chevrolet Colorado
PartNumber: HM89249Product Specifications- Notes: w/AAM Axle; w/Independent Carrier Assy; w/7.6in Ring Gear
- Part Description: 2006 Chevrolet Colorado Rear Inner Differential Pinion Bearing
Vehicle Fitment- 2006 Chevrolet Colorado | All Trims | All Engines
$24.88
FAQ for Differential Pinion Bearing Repair
Q: What is the proper way to install the drive pinion bearings?
A:
The proper way is to install the outer pinion bearing cup, install the selective shim between the inner pinion bearing and the shoulder on the gear, install a new collapsible spacer, install the outer pinion bearing onto the pinion, and then install the differential carrier assembly.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the drive pinion flange/yoke and/or oil seal?
A:
The proper way is to install the pinion yoke, install the washer and a new pinion nut, install the J 8614-01 onto the pinion yoke as shown, install the propeller shaft, and then install the brake drums.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the drive pinion flange/yoke and/or oil seal?
A:
The procedure is to remove the rear brake drums, remove the propeller shaft, remove the pinion nut while holding the J 8614-01, remove the washer, remove the pinion yoke by turning the J 8614-3, and then remove the pinion oil seal.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the differential drive pinion flange/yoke, seal, and dust deflector?
A:
The proper way is to install the new deflector onto the pinion yoke, install the new oil seal, install the washer and a new pinion nut, and then install the EPS.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the drive pinion bearings?
A:
The procedure is to remove the differential carrier assembly, remove the drive pinion from the axle, remove the shim, remove the outer pinion bearing cup from the axle housing using a hammer and a brass drift in the slots provided, and then remove the inner pinion bearing cup from the axle housing using a hammer and a brass drift in the slots provided.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the differential drive pinion flange/yoke, seal, and dust deflector?
A:
The procedure is to remove the Engine Protection Shield (EPS), remove the front propeller shaft, remove the brake calipers, remove the pinion nut while holding the J 8614-01, remove the pinion yoke clockwise while holding the J 8614-01, remove the oil seal using a suitable seal removal tool, and then remove the dust deflector from the pinion yoke using a soft-faced hammer.
By Bob
GM Specialist
01/11/2022See more FAQs (1)