< Back ×
2006 Chevrolet Colorado Turn Signal Bulbs
My Vehicle Change Vehicle
2006 Chevrolet Colorado
< Back to View All
Car Bulbs
- Department
- Prices
$5.33 MSRP:$9.63You Save: $4.30 (45%)Product Specifications- Notes: Canyon, Colorado; Front; Clear; W/O Xtreme Pkg; W/Xtreme Pkg
- Location: Driver Side; Passenger Side
- Item Dimensions: 3.3 x 2.1 x 2.1 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 1999368, 12450182, 9442486, 09442486, 01999368, 12450053
- Part Description: 2006 Chevrolet Colorado Run Lamp Bulb
Vehicle Fitment- 2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$12.61Product Specifications- Notes: Canyon, Colorado; Front; Amber; W/O Xtreme Pkg
- Location: Driver Side; Passenger Side
- Item Dimensions: 3.3 x 2.2 x 2.0 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 1999367, 10319395, 13500810, 01999367, 10351661
- Part Description: 2006 Chevrolet Colorado Bulb, Front Turn Signal Lamp
Vehicle Fitment- 2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$4.11 MSRP:$7.42You Save: $3.31 (45%)Product Specifications- Location: Driver Side; Passenger Side
- Item Dimensions: 4.4 x 4.4 x 4.2 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 Chevrolet Colorado License Lamp Bulb
Vehicle Fitment- 2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$2.86 MSRP:$5.15You Save: $2.29 (45%)Product Specifications- Item Dimensions: 4.2 x 3.1 x 2.3 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 15883346
- Part Description: 2006 Chevrolet Colorado Stoplamp Bulb
FAQ for Turn Signal Bulbs Repair
Q: What is the proper way to install the headlamp assembly or headlamp bulb and/or cornering, side marker, park, and turn signal bulb?
A:
The proper way is to connect the electrical connector to the bulb, push in and rotate the park lamp, high beam headlamp, low beam headlamp, or the DRL, Park and turn signal, and front side marker bulb 1/4 turn clockwise to install the bulb, install the bolts that retain the headlamp, and then install the front grille.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the tail lamp assembly and/or backup, side marker, stop, and turn signal bulb?
A:
The procedure is to remove the screws from the tail lamp assembly, remove the lamp assembly, remove the tail lamp and backup lamp sockets, depress the locking tab and rotate counterclockwise, and then remove the bulbs from the tail lamp, back up lamp, and/or side marker lamp sockets.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the headlamp assembly or headlamp bulb and/or cornering, side marker, park, and turn signal bulb?
A:
The procedure is to remove the front grille, remove the bolts that retain the headlamp, and then disconnect the electrical connector.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the tail lamp assembly and/or backup, side marker, stop, and turn signal bulb?
A:
The proper way is to install the bulbs to the tail lamp, back up lamp, and/or side marker lamp sockets, install the tail lamp and/or backup lamp sockets to the tail lamp, rotating clockwise until the locking tab is fully seated, press the tail lamp to the rear body panel until fully seated, and then install the tail lamp screws to the tail lamp.
By Bob
GM Specialist
01/11/2022