FAQ for Automatic Transmission Shifter Cable Repair
Q: What is the recommended torque for the range selector cable bracket nuts?
A:
The recommended torque is 20 Nm (15 Ib ft).
By BobGM Specialist
01/11/2022 Q: How to adjust the Automatic Transmission Range Selector Cable?
A:
You need to shift the transmission into neutral, pry to release the transmission shift control cable adjustment lock, check to be sure that the transmission floor shift control and the transmission are in the neutral detent position, and press to secure the transmission shift control cable adjustment lock.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the range selector lever nut?
A:
The recommended torque is 20 Nm (15 Ib ft).
By BobGM Specialist
01/11/2022 Q: How to remove the shift control cable from the shift control cable bracket?
A:
You need to use a flat-bladed screwdriver, pry the shift cable retaining staple clip from the cable, then depress the shift cable retaining tabs. While depressing the tabs, push the tabs through the hole in the shift cable bracket. Finally slide the cable out of the bracket slot.
By BobGM Specialist
01/11/2022 Q: How many nuts does Automatic Transmission Range Selector Cable Bracket have?
A:
It has a total of 2 range selector cable bracket nuts.
By BobGM Specialist
01/11/2022 Q: What should be cared about when replacing the damaged cable?
A:
If replacing a damaged cable, be sure that both the floor shift control and the transmission are neutral.
By BobGM Specialist
01/11/2022 See more FAQs (1)