< Back ×
My Vehicle Change Vehicle
2006 Chevrolet Corvette
< Back to View All
Rocker Panels & Floors
- Department
- Prices
OEM (Genuine) 2006 Chevrolet Corvette Rear Floor Pan
PartNumber: 25953291
Product Specifications- Notes: Coupe, Base; Convertible
- Other Names: Rear Floor Pan
- Item Dimensions: 79.1 x 52.3 x 25.6 inches
- Item Weight: 31.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15943839
- Part Description: 2006 Chevrolet Corvette Rear Floor Pan
Vehicle Fitment- 2006 Chevrolet Corvette | 427, Base, Grand Sport | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
$870.91 MSRP:$1313.86You Save: $442.95 (34%)
OEM (Genuine) 2006 Chevrolet Corvette Floor Pan
PartNumber: 89023043
Product Specifications- Notes: Base & 427
- Location: Driver Side
- Other Names: Floor Pan
- Item Dimensions: 54.2 x 26.9 x 9.4 inches
- Item Weight: 12.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12493114
- Part Description: 2006 Chevrolet Corvette Floor Pan
Vehicle Fitment- 2006 Chevrolet Corvette | 427, 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
$99.77 MSRP:$150.53You Save: $50.76 (34%)
OEM (Genuine) 2006 Chevrolet Corvette Floor Pan
PartNumber: 89023042
Product Specifications- Notes: Base & 427
- Location: Passenger Side
- Other Names: Floor Pan
- Item Dimensions: 53.7 x 27.2 x 9.2 inches
- Item Weight: 12.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 Chevrolet Corvette Floor Pan
Vehicle Fitment- 2006 Chevrolet Corvette | 427, 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
$95.77 MSRP:$144.50You Save: $48.73 (34%)
OEM (Genuine) 2006 Chevrolet Corvette Floor Pan
PartNumber: 25958368
Product Specifications- Notes: Z06, Zr1 & Grand Sport
- Location: Passenger Side
- Other Names: Floor Pan
- Item Dimensions: 52.3 x 22.6 x 1.4 inches
- Item Weight: 7.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10347013
- Part Description: 2006 Chevrolet Corvette Floor Pan
Vehicle Fitment- 2006 Chevrolet Corvette | 427 Limited Edition Z06, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
OEM (Genuine) 2006 Chevrolet Corvette Rear Floor Pan
PartNumber: 22824612
Product Specifications- Notes: Coupe, Z06, Zr1 & Grand Sport, Z06, Zr1 & Grand Sport
- Other Names: Rear Floor Pan
- Item Dimensions: 71.8 x 48.4 x 23.0 inches
- Item Weight: 358.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25953289, 15943838
- Part Description: 2006 Chevrolet Corvette Rear Floor Pan
Vehicle Fitment- 2006 Chevrolet Corvette | 427 Limited Edition Z06, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
OEM (Genuine) 2006 Chevrolet Corvette Panel-Floor
PartNumber: 25958369Product Specifications- Notes: Z06, Zr1 & Grand Sport
- Location: Driver Side
- Other Names: Floor Pan
- Item Dimensions: 52.8 x 22.6 x 1.3 inches
- Item Weight: 8.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10347014
- Part Description: 2006 Chevrolet Corvette Panel-Floor
Vehicle Fitment- 2006 Chevrolet Corvette | 427 Limited Edition Z06, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
FAQ for Floor Pan Repair
Q: How to remove the Carpet Retainer?
A:
You need to start at the lock pillar, lift the sill plate, unsnap the sill plate from the hinge pillar, slide the sill plate out from under the hinge pillar upper trim, and on the driver's side out from around the hood release handle and the foot rest.
By Bob
GM Specialist
29/10/2022Q: What is the installation procedure for the Carpet Retainer?
A:
The procedure is to position the front of the sill plate under the hinge pillar upper trim with the rear of the sill plate tilted up, lower the rear of the sill plate, insert the front of the sill plate behind the hood release handle, and the footrest (drivers side), push forward on the sill plate aligning the sill plate retainers with the slots in the door opening finish trim panel, snap the sill trim plate into the hinge pillar first and then into the door opening finish trim panel.
By Bob
GM Specialist
29/10/2022Q: What is the installation procedure for the Carpet-Intermediate (Convertible)?
A:
The procedure is to position the carpet to the intermediate body panel, tuck the carpet under the adjoining panels and over the floor carpet, install the stowage lid bracket, install the stowage lid extension panel with the manual release cable extending out from under the extension panel, and close the stowage lid and check the operation of the latch.
By Bob
GM Specialist
29/10/2022Q: How to install the carpet air outlet into the carpet to the passenger side correctly?
A:
You should rotate the air outlet 45 degrees counterclockwise and insert the outlet into the front of the carpet. And then rotate the air outlet 45 degrees clockwise to lock in position.
By Bob
GM Specialist
29/10/2022Q: How to remove the Carpet-Intermediate (Coupe)?
A:
You need to slide the seats forward, pull the carpet from under the adjoining trim panels, and remove the intermediate carpet.
By Bob
GM Specialist
29/10/2022Q: How many push-pin retainers does Carpet-Rear Compartment Floor (Convertible) have?
A:
It has a total of 2 push-pin retainers.
By Bob
GM Specialist
29/10/2022Q: How should you dry the Floor Carpet properly?
A:
If you observe puddles of liquid on the carpet face, use a wet vacuum to remove the excess moisture. Blot the face of the carpet with a towel to absorb as much moisture as possible. Point a fan at the affected area and air dry the carpet.
By Bob
GM Specialist
29/10/2022Q: What types of odor can GM Vehicle Care Odor Eliminator reduce or remove?
A:
It can remove objectionable smells of mold and mildew resulting from vehicle water leaks, and customer-created odors, such as smoke.
By Bob
GM Specialist
29/10/2022Q: How to remove the Carpet-Intermediate (Convertible)?
A:
You need to open the folding top stowage lid, remove the stowage lid extension panel, remove the stowage lid extension panel bracket, pull the carpet from under the adjoining panels, and remove the intermediate carpet.
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the footrest nuts?
A:
The recommended torque is 10 Nm (89 lb in).
By Bob
GM Specialist
29/10/2022See more FAQs (6)