< Back ×
My Vehicle Change Vehicle
2006 Chevrolet Corvette
< Back to View All
Interior & Exterior Trim
- Department
- Prices
OEM (Genuine) 2006 Chevrolet Corvette Pad, Driver Seat Cushion
PartNumber: 19330709
Product Specifications- Notes: W/O Heat, 2005-11; W/Heat; W/O Heat, 2005-10
- Other Names: Seat Cushion Pad
- Item Dimensions: 27.8 x 22.8 x 8.8 inches
- Item Weight: 1.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 88898540
- Part Description: 2006 Chevrolet Corvette Pad, Driver Seat Cushion
Vehicle Fitment- 2006 Chevrolet Corvette | 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
FAQ for Seat Cushion Pad Repair
Q: What is the recommended torque when installing the nuts to the right and left hinge bolts?
A:
The recommended torque is 24 Nm (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to remove the wire assembly from the seat cushion frame?
A:
First, you need to insert a screwdriver between the tension spring coils and pull toward the wires unhook the tension spring from the wire assembly. And then unhook the wire assembly from the front of the seat cushion frame.
By Bob
GM Specialist
01/11/2022Q: How many retainer clips does Seat Back Heater Element-Front have?
A:
It has a total of 2 retainer clips.
By Bob
GM Specialist
01/11/2022Q: How to remove the Seat Back Recliner Mechanism - Front?
A:
You need to remove the seat, the seat cushion cover, the hinge pin nuts, and the hinge pins, lay the seat back down, remove the cables from the actuators, remove the seat from the adjuster to access the recliner mechanism attaching screws, and remove the screws attaching the recliner mechanism and the recliner mechanism.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the hinge bolt nuts?
A:
The recommended torque is 24 Nm (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How many seat back trim to frame fasteners does Front Seat Back have?
A:
It has a total of 8 seat back trim to frame fasteners.
By Bob
GM Specialist
01/11/2022Q: What is the replacement procedure for the seat cushion?
A:
The procedure is to remove the hog rings attaching the cover to the frame, untie the drawstring releasing the cover from the frame.
By Bob
GM Specialist
01/11/2022Q: How to install the Front Seat Back Release Cable?
A:
You need to insert the release cables, snap the release lever mechanism to the seat back frame, route the cables, install the release cables to the right and left hinges, apply Loctite (TM) 271 to the hinge bolts, install the nuts to the right and left hinge bolts, install the free play retention cable to the passenger seat back, then install the seat back trim cover and pad.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the hinge bolt nuts?
A:
The recommended torque is 24 Nm (18 lb-ft).
By Bob
GM Specialist
01/11/2022See more FAQs (4)