< Back ×
My Vehicle Change Vehicle
2006 Chevrolet Equinox
< Back to View All
A/C & Heating
- Department
- Brands
- Prices
OEM (Genuine) 2006 Chevrolet Equinox Blower Motor
PartNumber: 22896430
Product Specifications- Other Names: Blower Motor
- Item Dimensions: 12.2 x 11.3 x 10.9 inches
- Item Weight: 3.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25952810, 15781505
- Part Description: 2006 Chevrolet Equinox Blower Motor
Vehicle Fitment- 2006 Chevrolet Equinox | L, LS, LT, LTZ, Premier, Sport | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
$269.52 MSRP:$508.54You Save: $239.02 (48%)
Four Seasons® Hvac Blower Motor With Wheel for 2006 Chevrolet Equinox
PartNumber: 75823Product Specifications- Notes: w/ Wheel; w/ AC
- Cage Wheel Included: w/ Wheel
- Connector Gender: Female
- Connector qty: 1
- Flanged End: Yes
- Material: Plastic
- Motor Diameter: 3.000
- Motor Length: 4.000
- Mount Type: OE Mount
- New or Reman: New
- Number of Terminals: 2
- O.E. Replacement: Yes
- Rotation: CCW
- Shaft Diameter: 0.3125
- Shaft Length: 1.6875
- Style: Flanged
- Terminal Type: 2 Lead Wires w/ Connector
- UPC: 096361758230
- Vented: Vented
- Voltage: 12
- Wheel Dia. IN: 6.250
- Wheel Height IN: 3.000
- Part Description: 2006 Chevrolet Equinox Hvac Blower Motor With Wheel
Vehicle Fitment- 2006 Chevrolet Equinox | All Trims | All Engines
$50.88
FAQ for Blower Motor Repair
Q: How to install the blower motor resistor?
A:
You will need to install the blower motor resistor and its screws and then connect the electrical connector to the blower motor resistor.
By Bob
GM Specialist
01/11/2022Q: How to correct the numerous system concerns?
A:
You should disconnect and inspect the instrument panel/body inline connector, pull upward to disengage the attaching clips, reach under the instrument panel, pull upwards to disengage the additional clips, remove the molding from the vehicle, disconnect the instrument panel/body inline connector, inspect the connector for bent or corroded terminals, remove any bent or corroded pins from the connector, install eh new terminal cut lead, pack the connector terminals, connect the instrument panel/body inline connector and then install the molding.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the blower motor resistor?
A:
The procedure is to disconnect the electrical connector from the blower motor resistor and remove the blower motor resistor screws and itself.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the blower motor resistor screws?
A:
The recommended torque is 1.5 N.m (13 lb in).
By Bob
GM Specialist
01/11/2022