< Back ×
My Vehicle Change Vehicle
2006 Chevrolet Equinox
< Back to View All
A/C & Heating
- Department
- Brands
- Prices
OEM (Genuine) 2006 Chevrolet Equinox Actuator
PartNumber: 15781467
Product Specifications- Notes: 2006-09, Air Inlet;2006-09, Mode Valve;2006-09, Temp Valve
- Other Names: Actuator, Door Actuator
- Item Dimensions: 18.9 x 12.5 x 12.2 inches
- Item Weight: 6.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19129840, 19129831
- Part Description: 2006 Chevrolet Equinox Actuator
Vehicle Fitment- 2006 Chevrolet Equinox | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
$88.41 MSRP:$160.77You Save: $72.36 (46%)
Four Seasons® HVAC Air Door Actuator for 2006 Chevrolet Equinox
PartNumber: 73256Product Specifications- Notes: Main
- Door Linkage: Male
- Mounting Ear Qty.: 3
- Style: Temperature Blend Actuator
- Terminal Pin Qty.: 5
- UPC: 096361077126
- Wire Quantity: Not Applicable
- Part Description: 2006 Chevrolet Equinox HVAC Air Door Actuator
Vehicle Fitment- 2006 Chevrolet Equinox | All Trims | All Engines
$91.65
Dorman® Hvac Air Door Actuator for 2006 Chevrolet Equinox
PartNumber: 604-114Product Specifications- Notes: Temperature; Packaging Type: Box;Air Inlet; Packaging Type: Box;Mode; Packaging Type: Box
- Material: Plastic
- OE Part Number: 15781467, 19129831, 19129840, 19129850
- Package Contents: Actuator
- Switch Activation Type: Rotary
- UPC: 019495240198
- Part Description: 2006 Chevrolet Equinox Hvac Air Door Actuator
Vehicle Fitment- 2006 Chevrolet Equinox | All Trims | All Engines
$54.20
FAQ for Hvac Heater Blend Door Actuator Repair
Q: What is the recommended torque for the mode cam bracket screws?
A:
The recommended torque is 1.5 N.m (13 lb in).
By Bob
GM Specialist
01/11/2022Q: How to install the mode cam?
A:
You can install the mode cam levers, the mode cam bracket, the mode cam bracket screws, the mode actuator to the evaporator case assembly, the mode actuator screws, the communication interface module, and the left side insulator/closeout panel.
By Bob
GM Specialist
01/11/2022Q: How to remove the mode cam?
A:
You can remove the left side insulator/closeout panel, the communication interface module, the mode actuator screws, the mode actuator, the screws retaining the mode cam bracket, and the mode cam.
By Bob
GM Specialist
01/11/2022Q: How to remove the air temperature actuator?
A:
You can remove the instrument panel compartment, the air temperature actuator screws, and the air temperature actuator.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the mode actuator screws?
A:
The recommended torque is 1.5 N.m (13 lb in).
By Bob
GM Specialist
01/11/2022Q: How to correct the mode door flutter noise?
A:
You can remove the left insulator panel, remove the knee bolster, remove the communication interface module from the support bracket, position it aside, remove the mode actuator, remove the mode cam bracket, mode cam, and the mode cam levers, and then you install the new mode cam levers, mode cam and the mode cam bracket, install the mode cam actuator, install the communication interface module, the knee bolster, install the left insulator panel, calibrate the mode actuator and then cycle the ignition and verify proper operation of the Heating Ventilation and Air Conditioning (HVAC) system.
By Bob
GM Specialist
01/11/2022Q: How to install the air temperature actuator?
A:
You can install the air temperature actuator screws and the instrument panel compartment.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the Recirculation Actuator screws?
A:
The recommended torque is 1.5 N.m (13 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the air temperature actuator screws?
A:
The recommended torque is 1.5 N.m (13 lb in).
By Bob
GM Specialist
01/11/2022Q: How to remove the recirculation actuator?
A:
You can remove the instrument panel upper trim panel and disconnect the electrical connector. Then you remove the recirculation actuator screws and the actuator from the Heating Ventilating Air Conditioning (HVAC) module.
By Bob
GM Specialist
01/11/2022See more FAQs (6)