FAQ for Idler Pulley Repair
Q: What is the installation procedure for the drive belt idler pulley?
A:
The procedure is to install the right belt idler pulley and bolt to the engine front cover, install the drive belt to the right idler pulley and install the air cleaner intake duct.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the drive belt idler pulley?
A:
The procedure is to remove the drive belt, J 39914, the right front wheel, the engine splash shield, and the lower belt idler pulley and bolt.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the right belt idler pulley and bolt?
A:
The recommended torque is 50 Nm (37 ft. lbs.).
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the left belt idler pulley and bolt?
A:
The recommended torque is 50 Nm (37 ft. lbs.).
By BobGM Specialist
01/11/2022 Q: How to remove the drive belt idler pulley?
A:
You can remove the air cleaner intake duct, release the tension on the drive belt, remove the drive belt from the right idler pulley, release J 39914 to relieve the drive belt tensioner spring tension, remove J 39914 from the drive belt tensioner, loosen the right belt idler bolt and then remove the right belt idler pulley and bolt from the engine front cover.
By BobGM Specialist
01/11/2022 Q: How to install the drive belt idler pulley?
A:
You can install the lower belt idler pulley and bolt, the engine splash shield, the right front wheel, the drive belt, and J39914.
By BobGM Specialist
01/11/2022 Q: What special tool will I need when servicing the drive belt idler pulley?
A:
You will need a serpentine belt tensioner unloader.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the lower belt idler pulley and bolt?
A:
The recommended torque is 50 Nm (37 ft. lbs.).
By BobGM Specialist
01/11/2022 See more FAQs (3)