< Back ×
My Vehicle Change Vehicle
2006 Chevrolet Equinox
< Back to View All
Steering Racks & Gearboxes
- Department
- Prices
OEM (Genuine) 2006 Chevrolet Equinox Gear Kit, Steering
PartNumber: 19133700
Product Specifications- Notes: 3.4 Liter; Equinox, Torrent
- Other Names: Gear Assembly, Steering Gear
- Item Dimensions: 8.2 x 62.8 x 6.1 inches
- Item Weight: 16.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 89060251
- Part Description: 2006 Chevrolet Equinox Gear Kit, Steering
Vehicle Fitment- 2006 Chevrolet Equinox | LS, LT | 6 Cyl 3.4 L GAS
FAQ for Steering Gearbox Repair
Q: What is the recommended torque for the cradle mounting bolts?
A:
The recommended torque is 110 Nm (81 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: What special tool will I need when servicing the rack and pinion boot?
A:
You will need keystone clamp pliers.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the intermediate pinch bolt?
A:
The recommended torque is 34 Nm (25 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: How to remove the power steering gear?
A:
You can remove the front tires, remove both outer tie rods to steering knuckle nuts, separate the tie rods from the steering knuckles, remove the intermediate to steering gear pinch bolt, remove the steering gear to cradle mounting bolts, and then remove the steering gear through the right side of the vehicle.
By Bob
GM Specialist
01/11/2022Q: How to install the rack and pinion boot?
A:
You can install the boot with the large clamp loosely attached, the spring clamp to the small end of the boot, the jam nut, the outer tie rod, and the tire assembly.
By Bob
GM Specialist
01/11/2022Q: How to install the power steering gear?
A:
You can install the steering gear from the right side of the vehicle, connect the intermediate shaft to the steering gear and install a new pinch bolt and then install the front tires and wheels.
By Bob
GM Specialist
01/11/2022Q: How to remove the rack and pinion boot?
A:
You can remove the tire assembly, the outer tie rod, the jam nut, and the spring from the boot.
By Bob
GM Specialist
01/11/2022Q: What special tool will I need when servicing the power steering gear?
A:
You will need a steering linkage and tie rod puller.
By Bob
GM Specialist
01/11/2022See more FAQs (3)