< Back ×
My Vehicle Change Vehicle
2006 Chevrolet Equinox
< Back to View All
Wipers & Washers
- Department
- Brands
- Prices
Cardone Reman® Remanufactured Wiper Motor for 2006 Chevrolet Equinox
PartNumber: 40-1081Product Specifications- Notes: Motor without Washer Pump
- E-Waste: Yes
- Mounting Hole Quantity: 3
- Mounting Type: Grommet
- Package Contents: Wiper Motor, Instruction Manual
- Product Condition: Remanufactured
- Product Packing Weight: 2.45 lbs
- Terminal Type: Blade
- Washer Pump Included: No
- Part Description: 2006 Chevrolet Equinox Remanufactured Wiper Motor
Vehicle Fitment- 2006 Chevrolet Equinox | All Trims | All Engines
$147.88
Cardone Reman® Remanufactured Wiper Motor for 2006 Chevrolet Equinox
PartNumber: 40-1057Product Specifications- Notes: Motor without Washer Pump
- E-Waste: Yes
- Mounting Hole Quantity: 3
- Mounting Type: Direct Bolt, Grommet
- Package Contents: Wiper Motor, Instruction Manual
- Product Condition: Remanufactured
- Product Packing Weight: 3.5 lbs
- Terminal Type: Blade
- Washer Pump Included: No
- Part Description: 2006 Chevrolet Equinox Remanufactured Wiper Motor
Vehicle Fitment- 2006 Chevrolet Equinox | All Trims | All Engines
$109.96
OEM (Genuine) 2006 Chevrolet Equinox Rear Motor
PartNumber: 15813164
Product Specifications- Notes: Equinox, Torrent
- Other Names: Rear Motor, Wiper Motor, Wiper Motor Assembly
- Item Dimensions: 8.3 x 6.1 x 11.6 inches
- Item Weight: 4.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 5480787, 05480787
- Part Description: 2006 Chevrolet Equinox Rear Motor
Vehicle Fitment- 2006 Chevrolet Equinox | LS, LT | 6 Cyl 3.4 L GAS
OEM (Genuine) 2006 Chevrolet Equinox Front Motor
PartNumber: 15813769
Product Specifications- Notes: Equinox, Torrent
- Other Names: Front Motor, Wiper Motor
- Item Dimensions: 7.4 x 6.2 x 12.6 inches
- Item Weight: 3.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22665038
- Part Description: 2006 Chevrolet Equinox Front Motor
Vehicle Fitment- 2006 Chevrolet Equinox | LS, LT | 6 Cyl 3.4 L GAS
FAQ for Windshield Wiper Motors Repair
Q: What is the installation procedure for the wiper motor module?
A:
The procedure is to connect the wiper module electrical connector to the motor, connect the wire harness rosebud clip to the wiper module frame, install the wiper module assembly into the plenum, install the fasteners attaching the wiper module assembly to the plenum, the air inlet screens, and the wiper arms.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the fasteners?
A:
The recommended torque is 12 N.m (9 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the wiper motor bolts?
A:
The recommended torque is 7 N.m (62 lb in).
By Bob
GM Specialist
01/11/2022Q: How to remove the wiper motor?
A:
You can remove the wiper motor module, the wiper motor to crank nut, the two-wiper motor to wiper module frame bolts, and the wiper motor from the wiper module.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the two-wiper motor to wiper module frame bolts?
A:
The recommended torque is 8 N.m (71 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the wiper motor?
A:
The procedure is to place the wiper motor to the wiper module, install the two-wiper motor to wiper module frame bolts, install the wiper motor crank arm and crank arm nut and then install the wiper motor module.
By Bob
GM Specialist
01/11/2022Q: How to remove the wiper motor module?
A:
You can remove the wiper arms, the air inlet grille, and then the wiper module bolts. And then you can lift the wiper motor module away from the cowl, disconnect the wire harness rosebud clip from the wiper module frame and disconnect the wiper module electrical connector at the motor.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the wiper motor?
A:
The procedure is to remove the rear wiper arm, the liftgate trim panel, the rear wiper motor bolts, and the motor by sliding the pivot shaft out of the rear window grommet.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the wiper motor module grommet?
A:
The procedure is to install the grommets and the bushings to the module and the front wiper motor.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the wiper motor crank arm and crank arm nut?
A:
The recommended torque is 14 N.m (10 lb in).
By Bob
GM Specialist
01/11/2022See more FAQs (6)