Part Description: 2006 Chevrolet Impala Ball Joint
More Info
Vehicle Fitment
2006 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
FAQ for Ball Joint Repair
Q: What should be done before servicing the Lower Ball Joint?
A:
Raise and support the vehicle.
By Bob
GM Specialist
29/10/2022
Q: What special tool will I need when servicing the Lower Ball Joint?
A:
You will need a ball joint/stud separator.
By Bob
GM Specialist
29/10/2022
FAQ for Other Repair Info
Q: What special tool will I need when servicing the Park Brake Cable?
Q: What should be done before servicing the Power Steering Pressure Pipe/Hose?
A:
Remove the drive belt, place a drain pan under the vehicle, raise and lower the vehicle as necessary to access the Power Steering Hose fitting at the rack and pinion, and fill and bleed the power steering system after the repair has been completed.
Q: What is the installation procedure for the Brake Booster Vacuum Sensor?
A:
Install the Brake Booster vacuum sensor grommet to the booster, install the brake booster vacuum sensor to the booster, and connect the brake booster vacuum sensor electrical connector.