< Back ×
2006 Chevrolet Impala Steering Shaft
My Vehicle Change Vehicle
2006 Chevrolet Impala
< Back to View All
Steering Systems
- Department
- Brands
- Prices
$100.41Product Specifications- Finish: Natural
- Material: Steel
- OE Part Number: 25913681, 25937479
- Shaft Diameter: 0.78"
- Shaft Length: 4.72"
- Spline Count: 27
- UPC: 019495216667
- Part Description: 2006 Chevrolet Impala Lower Steering Shaft
Vehicle Fitment- 2006 Chevrolet Impala | All Trims | All Engines
$190.00 MSRP:$314.49You Save: $124.49 (40%)Product Specifications- Notes: Column Shift; Floor Shift
- Other Names: Shaft, Shaft Assembly, Upper Shaft
- Item Dimensions: 6.4 x 5.0 x 4.8 inches
- Item Weight: 1.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 Chevrolet Impala Upper Shaft
Vehicle Fitment- 2006 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
$77.41 MSRP:$156.14You Save: $78.73 (51%)Product Specifications- Notes: Impala
- Other Names: Lower Shaft
- Item Dimensions: 4.0 x 3.7 x 23.6 inches
- Item Weight: 2.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 Chevrolet Impala Steering Column-Lower Shaft
Vehicle Fitment- 2006 Chevrolet Impala | Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
Product Specifications- Notes: Column Shift; Floor Shift
- Other Names: Intermed Shaft, Lower Shaft
- Item Dimensions: 4.2 x 4.0 x 12.2 inches
- Item Weight: 3.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25913681, 25937479, 10386037, 15925776
- Part Description: 2006 Chevrolet Impala Steering Gear Coupling Shaft Assembly
Vehicle Fitment- 2006 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
FAQ for Steering Shaft Repair
Q: What should be done before servicing the Intermediate Steering Shaft Seal?
A:
Turn the ignition OFF and remove the key from the ignition lock cylinder to lock the steering column.
By Bob
GM Specialist
02/11/2022Q: What special tool will I need when servicing the Intermediate Steering Shaft?
A:
You will need a steering column anti-rotation pin.
By Bob
GM Specialist
02/11/2022Q: What should be done before servicing the Steering Shaft, Lower Bearing, and Jacket?
A:
Remove the ignition lock cylinder case.
By Bob
GM Specialist
02/11/2022Q: What should be done before servicing the Intermediate Steering Shaft?
A:
Raise and support the vehicle.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the intermediate shaft seal bolts?
A:
The recommended torque is 3 N.m (27-inch lbs.).
By Bob
GM Specialist
02/11/2022Q: What special tool will I need when servicing the Steering Shaft, Lower Bearing, and Jacket?
A:
You will need a pivot pin remover and centering sphere installer tool.
By Bob
GM Specialist
02/11/2022See more FAQs (1)