< Back ×
My Vehicle Change Vehicle
2006 Chevrolet Monte Carlo
< Back to View All
Brake Lines & Hoses
- Department
- Brands
- Prices
Centric® Front Passenger Side Brake Hose for 2006 Chevrolet Monte Carlo
PartNumber: 150.62137Product Specifications- UPC: 805890247449
- Part Description: 2006 Chevrolet Monte Carlo Front Passenger Side Brake Hose
Vehicle Fitment- 2006 Chevrolet Monte Carlo | All Trims | All Engines
$16.56
Centric® Front Driver Side Brake Hose for 2006 Chevrolet Monte Carlo
PartNumber: 150.62138Product Specifications- UPC: 805890247456
- Part Description: 2006 Chevrolet Monte Carlo Front Driver Side Brake Hose
Vehicle Fitment- 2006 Chevrolet Monte Carlo | All Trims | All Engines
$16.56
Centric® Rear Brake Hose for 2006 Chevrolet Monte Carlo
PartNumber: 150.62432Product Specifications- UPC: 805890247609
- Part Description: 2006 Chevrolet Monte Carlo Rear Brake Hose
Vehicle Fitment- 2006 Chevrolet Monte Carlo | All Trims | All Engines
$11.06
OEM (Genuine) 2006 Chevrolet Monte Carlo Hose Asm, Rear Brake
PartNumber: 19366667
Product Specifications- Location: Driver Side
- Other Names: Brake Hose, Flex Hose
- Item Dimensions: 5.3 x 2.1 x 14.1 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15242630
- Part Description: 2006 Chevrolet Monte Carlo Hose Asm, Rear Brake
Vehicle Fitment- 2006 Chevrolet Monte Carlo | LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2006 Chevrolet Monte Carlo Hose Asm-Rear Brake
PartNumber: 15242629
Product Specifications- Location: Passenger Side
- Other Names: Brake Hose, Flex Hose
- Item Dimensions: 11.3 x 5.7 x 3.5 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 Chevrolet Monte Carlo Hose Asm-Rear Brake
Vehicle Fitment- 2006 Chevrolet Monte Carlo | LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2006 Chevrolet Monte Carlo Hose Asm-Front Brake
PartNumber: 84393885
Product Specifications- Location: Driver Side
- Other Names: Brake Hose, Flex Hose
- Item Dimensions: 10.4 x 8.5 x 5.4 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15242632
- Part Description: 2006 Chevrolet Monte Carlo Hose Asm-Front Brake
Vehicle Fitment- 2006 Chevrolet Monte Carlo | LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2006 Chevrolet Monte Carlo HOSE ASM-FRT BRK
PartNumber: 84393884Product Specifications- Location: Passenger Side
- Other Names: Brake Hose, Flex Hose
- Item Dimensions: 10.4 x 8.6 x 5.4 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15242631
- Part Description: 2006 Chevrolet Monte Carlo HOSE ASM-FRT BRK
Vehicle Fitment- 2006 Chevrolet Monte Carlo | LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
FAQ for Brake Hose Repair
Q: How do you install the front brake hose?
A:
You can assemble the new copper brake hose gaskets and the brake hose bolt, install the brake hose to the caliper bolt, install the brake hose into the bracket, install the retainer, remove the rubber cap or plug, connect the brake pipe fitting to the brake hose, install the front tire and wheel assembly, ensure that the hose does not make contact with any part of the suspension, bleed the hydraulic brake system and lower the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the front brake hose?
A:
The procedure is to raise the vehicle, remove the front tire and wheel assembly, clean all dirt and foreign material from the brake hoses and brake pipe fitting, disconnect the brake pipe fitting, cap or plug the brake pipe fitting end, remove the brake hose retaining clip, remove the hose, remove the brake hose to caliper bolt, remove the brake hose and remove and discard the two copper brake hose gaskets.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the rear brake hose?
A:
You can assemble the new copper brake hose gaskets and the brake hose bolt, install the brake hose to caliper bolt, install the brake hose into the bracket, install the retainer, remove the rubber cap or plug, connect the brake pipe fitting to the brake hose, install the rear tire and wheel assembly, ensure that the hose does not make contact with any part of the suspension, bleed the hydraulic brake system and lower the vehicle.
By Bob
GM Specialist
01/11/2022Q: What should you use when replacing brake pipes?
A:
You should always use double-walled steel brake pipes when replacing brake pipes.
By Bob
GM Specialist
01/11/2022Q: What tool can you use to cut the brake pipe squarely to the measured length?
A:
You can use the pipe cutter included in the J45405.
By Bob
GM Specialist
01/11/2022Q: How do you replace the rear brake hose?
A:
You can raise the vehicle, remove the rear tire and wheel assembly, clean all dirt and foreign material from the brake hoses and brake pipe fitting, disconnect the brake pipe fitting, remove the brake hose retaining clip, remove the hose, remove the brake hose to caliper bolt, remove the brake hose and remove and discard the two copper brake hose gaskets.
By Bob
GM Specialist
01/11/2022See more FAQs (1)