< Back ×
My Vehicle Change Vehicle
2006 Chevrolet Monte Carlo
< Back to View All
Steering Systems
- Department
- Brands
- Prices
OEM (Genuine) 2006 Chevrolet Monte Carlo Upper Shaft
PartNumber: 26074286
Product Specifications- Other Names: Shaft, Shaft Assembly, Upper Shaft
- Item Dimensions: 6.4 x 5.0 x 4.8 inches
- Item Weight: 1.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 Chevrolet Monte Carlo Upper Shaft
Vehicle Fitment- 2006 Chevrolet Monte Carlo | LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
$190.00 MSRP:$314.49You Save: $124.49 (40%)
Dorman® Lower Steering Shaft for 2006 Chevrolet Monte Carlo
PartNumber: 425-155Product Specifications- Color: Natural
- Finish: Natural
- Installation Instructions Included: No
- Material: Steel
- Mounting Hardware Included: No
- OE Part Number: 10376428, 15925775, 25913680
- Shaft Diameter: 0.78"
- Shaft Diameter (in): 0.78"
- Shaft Length: 5.46"
- Shaft Length (In): 5.46"
- Shaft Material: Steel
- Spline Count: 22
- UPC: 019495119913
- Part Description: 2006 Chevrolet Monte Carlo Lower Steering Shaft
Vehicle Fitment- 2006 Chevrolet Monte Carlo | All Trims | All Engines
OEM (Genuine) 2006 Chevrolet Monte Carlo Steering Gear Coupling Shaft Assembly
PartNumber: 25913680
Product Specifications- Other Names: Intermed Shaft, Intermediate Shaft
- Item Dimensions: 12.1 x 4.3 x 4.1 inches
- Item Weight: 3.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10376428, 10327553, 15925775
- Part Description: 2006 Chevrolet Monte Carlo Steering Gear Coupling Shaft Assembly
Vehicle Fitment- 2006 Chevrolet Monte Carlo | LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
FAQ for Steering Shaft Repair
Q: What is the removal procedure for the intermediate steering shaft?
A:
The procedure is to raise the vehicle, remove the tire and wheel assembly, install J 42640, position the intermediate steering shaft seal, remove the lower pinch bolt and the intermediate steering shaft, lower the vehicle, remove the left instrument panel insulator, reposition the intermediate steering shaft seal, remove the upper pinch bolt, disconnect the intermediate steering shaft and remove the intermediate steering shaft.
By Bob
GM Specialist
02/11/2022Q: What is the first step for replacing the steering shaft, lower bearing, and jacket?
A:
The first step is to remove the ignition lock cylinder case.
By Bob
GM Specialist
02/11/2022Q: How do you install the intermediate steering shaft seal?
A:
You can install the intermediate shaft lower and upper seal, connect the intermediate shaft to the steering column, install the intermediate shaft seal to the steering column and install the intermediate shaft seal bolts.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the intermediate steering shaft seal?
A:
The procedure is to turn the ignition off, remove the key from the ignition lock cylinder, remove the intermediate shaft seal from the steering column, disconnect the intermediate shaft, push the intermediate shaft down, remove the intermediate shaft seal bolts and remove the intermediate shaft seal.
By Bob
GM Specialist
02/11/2022Q: How do you install the intermediate steering shaft?
A:
You can position the intermediate steering shaft into place, install the upper pinch bolt and the intermediate steering shaft seal, raise the vehicle, install the intermediate steering shaft and the lower pinch bolt, remove the J 42640, install the intermediate steering shaft seal onto the power steering gear, install the tire and wheel assembly, lower the vehicle and install the left instrument panel insulator.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque when you install the 4 new steering column support TORX screws?
A:
You can tighten the 4 steering column support TORX screws to 17 Nm (13 ft. lbs.).
By Bob
GM Specialist
02/11/2022See more FAQs (1)