< Back ×
My Vehicle Change Vehicle
2006 GMC Yukon
< Back to View All
Transmissions Components & Shifters
- Department
- Brands
- Prices
Dorman® Automatic Transmission Oil Cooler Line Connector for 2006 GMC Yukon
PartNumber: 800-727Product Specifications- Notes: Trans Oil Cooler Line Connector to Oil Cooler; Pkg Quantity: 1
- Fitting Angle: Straight
- Fitting Attachment End 1: Quick Disconnect
- Fitting Attachment End 2: Male Thread
- Fitting Size End 1 (in): 0.375"
- Fitting Size End 2 (in): 0.563"
- Line Fitting Type: Transmission Line Connector
- Material: Aluminum
- OE Part Number: 19210848
- Thread Sealer Present: No
- UPC: 037495548113
- Part Description: 2006 GMC Yukon Automatic Transmission Oil Cooler Line Connector
Vehicle Fitment- 2006 GMC Yukon | All Trims | 8 Cyl 4.8L
- 2006 GMC Yukon | All Trims | 8 Cyl 5.3L
- 2006 GMC Yukon | All Trims | 8 Cyl 6.0L
$7.16
FAQ for Automatic Transmission Oil Cooler Line Connector Repair
Q: What is the removal procedure for the transmission fluid cooler line quick connect fitting?
A:
You need to pull the plastic cap back from the quick connect fitting and down along the cooler line about 5 cm (2 inches), pull on one of the open ends of the retaining ring to rotate the retaining ring around the quick connect fitting, remove the retaining ring from the quick connect fitting, discard the retaining ring, and pull the cooler line straight out from the quick connect fitting.
By Bob
GM Specialist
01/11/2022Q: What is the new recommended torque for the fittings?
A:
The recommended torque is 20 Nm (14 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What should be noticed when installing the transmission fluid cooler line quick connect fitting?
A:
You should not reuse any of the existing oil lines or oil line fittings if there is excessive corrosion, or not reuse any of the existing retaining rings that were removed from the existing quick connect fittings. Install new retaining rings.
By Bob
GM Specialist
01/11/2022