Contact Us Live Chat or 1-888-220-8330
Search Bar
Search by Part Number or Keywords
  • My Garage
  • My Account
  • Cart
  • Body & Mirrors
  • Chassis & Brakes
  • Engine & Drivetrain
  • Electrical & Lighting
Help Center
< Back ×
  • Body & Mirrors
  • Chassis & Brakes
  • Engine & Drivetrain
  • Electrical & Lighting
Login/Register My Account Track Order Help Center Contact Us
Replacement and OEM Parts for 2006 GMC Yukon Brake Proportioning Valve

2006 GMC Yukon Brake Proportioning Valve

My Vehicle Change Vehicle
2006 GMC Yukon
Change Vehicle
Vehicle Options
We need more information about your vehicle to make a correct determination of fitment
< Back to View All
Brake Boosters & Brake Master Cylinders
  • Department
  • Prices

1 Product found

2 Q&A for Brake Proportioning Valve Repair
Show Item:
  • 30
  • 60
  • 90
Sort by:
Recommended
Filter
Sort
View by
  • OEM 2006 GMC Yukon Valve Kit, Power Brake Booster Vacuum Check Diagram - 18022219
    View Related Parts

    OEM (Genuine) 2006 GMC Yukon Valve Kit, Power Brake Booster Vacuum Check

    PartNumber: 18022219
    OEM 2006 GMC Yukon Valve Kit, Power Brake Booster Vacuum Check - 18022219
    Product Specifications
    • Notes: All Models
    • Item Dimensions: 4.1 x 2.0 x 2.1 inches
    • Item Weight: 0.50 Pounds
    • Fitment Type: Direct Replacement
    • Replaces: 18029764, 18021440, 18012017, 18020818, 18029792
    • Part Description: 2006 GMC Yukon Valve Kit, Power Brake Booster Vacuum Check
    More Info
    Vehicle Fitment
    • 2006 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    $21.08 MSRP: $41.82
    You Save: $20.74 (50%)

FAQ for Brake Proportioning Valve Repair

Q: What is the removal procedure for the combination valve?
A:
You need to remove the combination valve electrical connector, the front, and rear brake pipes, and the combination valve from the vehicle.
By Bob
GM Specialist
28/10/2022
Q: How to install the combination valve?
A:
You need to install the combination valve to the vehicle and the front and the rear brake pipes to the combination valve, connect the combination valve electrical connector, and bleed the brake system.
By Bob
GM Specialist
28/10/2022

FAQ for Other Repair Info

Q: What is the procedure for the master cylinder bench bleeding?
A:
You need to secure the mounting flange of the Brake Master Cylinder in a bench vise, remove the master cylinder reservoir cap and diaphragm, install suitable fittings to the master cylinder ports, install transparent hoses to the fittings installed to the master cylinder ports, route the hoses into the master cylinder reservoir, fill the master cylinder reservoir to at least the half-way point, ensure that the ends of the transparent hoses running into the master cylinder reservoir are fully submerged in the brake fluid, depress and release the primary piston until fluid flows freely from the ports with no evidence of air bubbles, remove the transparent hoses, install the master cylinder reservoir cap and diaphragm, remove the fittings with the transparent hoses and the master cylinder from the vise.
Q: What is the removal procedure for the hydraulic brake booster?
A:
You need to apply the parking brake and block the wheels, disconnect the inlet hose, the steering gear, and the return hoses from the booster assembly, remove the master cylinder, the stop lamp switch, the 4 boosters to bulkhead nuts, the booster assembly and the gasket.
Q: What should we do if the brake system warning lamp remains illuminated?
A:
You should not allow the vehicle to be driven until it is diagnosed and repaired.