< Back ×
My Vehicle Change Vehicle
2006 GMC Yukon
< Back to View All
Cooling Systems, Fans & Radiators
- Department
- Prices
OEM (Genuine) 2006 GMC Yukon Shroud Kit, Engine Electric Coolant Fan
PartNumber: 89023365
Product Specifications- Notes: 2005-06
- Other Names: Fan Shroud, Shroud
- Item Dimensions: 40.4 x 23.3 x 9.4 inches
- Item Weight: 6.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 GMC Yukon Shroud Kit, Engine Electric Coolant Fan
Vehicle Fitment- 2006 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
FAQ for Cooling Fan Shroud Repair
Q: What is the recommended torque for the cooling fan shroud bolts?
A:
The recommended torque is 9 Nm (80-inch lbs.).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the fan shroud bolts?
A:
The recommended torque is 9 Nm (80-inch lbs.).
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the cooling fan and shroud?
A:
You need to disengage the radiator inlet hose clip, reposition the surge tank inlet hose clamp, remove the surge tank inlet hose, disconnect the electrical connectors, remove the clip attaching the wiring harness to the shroud, open the engine oil cooler line clip and remove the cooler lines, remove the cooling fan shroud bolts and the cooling fan and shroud.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the fan shroud in the lower?
A:
You need to rove the cooling fan, remove the oil cooler hose clip from the lower fan shroud, and lift the lower fan shroud to disengage the fan shroud from the retaining clips on the radiator.
By Bob
GM Specialist
01/11/2022Q: How to install the fan shroud in the lower?
A:
You need to install the lower fan shroud to the retaining clips on the radiator and install the oil cooler hose clip to the lower fan shroud and the cooling fan.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the fan shroud in the upper (w/RPO M74)?
A:
You need to loosen the air cleaner outlet duct clamps and the air cleaner outlet duct clamps, remove the air cleaner outlet duct, the A/C line retainer, the engine harness clip, the transmission central module (TCM) cover bolts, and TCM cover, loosen the TCM electrical connector bolts, disconnect the TCM electrical connectors, remove the TCM and cover, the fan shroud retainers, the fan shroud bolts, and the upper fan shroud.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the fan shroud in the upper (w/o RPO M74)?
A:
You need to loosen the air cleaner outlet duct clamps, loosen the air cleaner outlet duct clamps, remove the air cleaner outlet duct, the throttle body heater hose retainer, the inlet radiator hose retainer, the fan shroud retainers, the fan shroud bolts, and the upper fan shroud.
By Bob
GM Specialist
01/11/2022See more FAQs (2)