Notes: Headliner & Components, Without Sunroof, Without SLE, Pewter; Headliner & Components, With Sunroof, Without SLE, Pewter
Other Names: Dome Lamp
Item Dimensions: 5.0 x 4.8 x 11.2 inches
Item Weight: 0.50 Pounds
Fitment Type: Direct Replacement
Part Description: 2006 GMC Yukon Lamp Asm-Dome & Reading *Pewter R
More Info
Vehicle Fitment
2006 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
FAQ for Dome Lights Repair
Q: How to install the dome lamp?
A:
You need to install the bulb, connect the electrical connector, install the dome lamp assembly, and press the lens into place.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the dome lamp?
A:
You need to remove the lamp lens assembly and the dome lamp assembly, disconnect the electrical connector, and remove the bulb.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the starter shield?
A:
You need to remove the Starter motor, remove the starter heat shield if equipped with a 4.8L, 5.3L, or 6.0L engine, remove the starter heat shield bolts, and nut if equipped with an 8.1L engine, and remove the starter heat shield.
Q: What is the removal procedure for the body control module?
A:
You need to disconnect the negative battery cables, remove the knee bolster, disconnect the brown connector and all other connectors, and remove the Body Control Module (BCM) from the sliding bracket.
Q: How to install the seat switch bezel?
A:
You need to install the power seat adjuster switch assembly to the seat switch bezel and the lumbar support switch to the seat switch bezel, connect the electrical connectors, and install the screws retaining the Power Seat Switch bezel.