< Back ×
My Vehicle Change Vehicle
2006 GMC Yukon
< Back to View All
Exhaust Manifolds, Pipes & Mufflers
- Department
- Prices
OEM (Genuine) 2006 GMC Yukon Converter & Pipe
PartNumber: 10395214
Product Specifications- Notes: All Models; 6.0L; 1/2 Ton; W/O Silverado, Sierra; Left; 6.0 Liter, All
- Location: Driver Side
- Other Names: Catalytic Converter, Converter & Pipe, Front Pipe
- Item Dimensions: 51.8 x 20.2 x 15.2 inches
- Item Weight: 20.30 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 19420109
- Part Description: 2006 GMC Yukon Converter & Pipe
Vehicle Fitment- 2006 GMC Yukon | Denali | 8 Cyl 6.0 L GAS
$1230.69 MSRP:$1843.58You Save: $612.89 (34%)
OEM (Genuine) 2006 GMC Yukon Converter & Pipe
PartNumber: 19208464
Product Specifications- Notes: 4.8 Liter, All; 5.3 Liter, All; All Models; 4.8L, 5.3L
- Other Names: Catalytic Converter, Converter & Pipe
- Item Dimensions: 44.3 x 34.7 x 16.2 inches
- Item Weight: 35.20 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 19420098
- Part Description: 2006 GMC Yukon Converter & Pipe
Vehicle Fitment- 2006 GMC Yukon | SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
$992.34 MSRP:$1484.08You Save: $491.74 (34%)
OEM (Genuine) 2006 GMC Yukon Converter & Pipe
PartNumber: 10395213
Product Specifications- Notes: All Models; 6.0L; 1/2 Ton; W/O Silverado, Sierra; Right; 6.0 Liter, All
- Location: Passenger Side
- Other Names: Catalytic Converter, Converter & Pipe, Front Pipe
- Item Dimensions: 40.2 x 11.3 x 7.1 inches
- Item Weight: 17.00 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 19420124
- Part Description: 2006 GMC Yukon Converter & Pipe
Vehicle Fitment- 2006 GMC Yukon | Denali | 8 Cyl 6.0 L GAS
$946.54 MSRP:$1415.00You Save: $468.46 (34%)
FAQ for Exhaust Pipe Repair
Q: What is the recommended torque for the exhaust pipe hanger bracket bolts?
A:
The recommended torque is 12 Nm (106-inch lbs.).
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the exhaust seal?
A:
You need to raise and suitably support the vehicle, disconnect the Connector Position Assurance (CPA) retainer and the oxygen sensor electrical connector, support the catalytic converter or exhaust manifold pipe, remove the right exhaust manifold pipe nuts, the left exhaust manifold pipe nuts and the exhaust hanger mounting bracket bolts, lower the catalytic converter or exhaust manifold pipe, and remove the exhaust manifold pipe seal(s).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for exhaust pipe hanger bracket bolts?
A:
The recommended torque is 12 Nm (106 inch lbs.).
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the exhaust manifold pipe (6.0L and 8.1L Engines)?
A:
You need to raise and suitably support the vehicle, support the transmission, remove the transmission mount to transmission support nuts, raise the transmission off of the transmission support, remove the transmission support cross-member bolts, the transmission support cross-member, the exhaust muffler, and the clip, disconnect the Connector Position Assurance (CPA) retainer and the oxygen sensor electrical connector, remove the oxygen sensor and the exhaust manifold pipe nuts, lower the transmission slightly, remove the exhaust manifold pipe, and discard the exhaust manifold pipe seal.
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the exhaust hanger mounting bracket (6.0L and 8.1 L Engines)?
A:
You need to remove the exhaust manifold pipe and the catalytic converter, remove the exhaust pipe hanger bracket bolts if equipped with a 4L80E transmission, remove the exhaust pipe hanger bracket bolts if equipped with a 4L60E transmission, and remove the exhaust manifold pipe bracket.
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the exhaust manifold pipe nuts?
A:
The recommended torque is 50 Nm (39 ft. lbs.).
By Bob
GM Specialist
29/10/2022See more FAQs (1)