< Back ×
My Vehicle Change Vehicle
2006 GMC Yukon
< Back to View All
Fuel Systems
- Department
- Brands
- Prices
OEM (Genuine) 2006 GMC Yukon Fuel Gauge Sending Unit
PartNumber: 88965800
Product Specifications- Notes: Tahoe, Yukon; 5.3L; Vin Code Z
- Other Names: Fuel Gauge Sending Unit, Level Sensor
- Item Dimensions: 7.9 x 5.6 x 5.3 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 GMC Yukon Fuel Gauge Sending Unit
Vehicle Fitment- 2006 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
$158.99 MSRP:$300.00You Save: $141.01 (48%)
Dorman® Fuel Level Sensor for 2006 GMC Yukon
PartNumber: 911-023Product Specifications- Color/Finish: Natural
- Connector/Terminal Type: Female Connector, Male Terminal
- Gasket or Seal Included: Yes
- Housing Material: Metal and Plastic
- OE Part Number: 19207717
- UPC: 019495360834
- Part Description: 2006 GMC Yukon Fuel Level Sensor
Vehicle Fitment- 2006 GMC Yukon | All Trims | 8 Cyl 4.8L
- 2006 GMC Yukon | All Trims | 8 Cyl 5.3L
$52.16
OEM (Genuine) 2006 GMC Yukon Fuel Tank Meter/Pump SENSOR KIT
PartNumber: 19207717
Product Specifications- Other Names: Fuel Gauge Sending Unit, Level Sensor
- Item Dimensions: 12.1 x 6.8 x 3.9 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19168130, 19149064, 88965560
- Part Description: 2006 GMC Yukon Fuel Tank Meter/Pump SENSOR KIT
Vehicle Fitment- 2006 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
FAQ for Fuel Level Sensor Repair
Q: How to install the fuel level sensor (Front Tank)?
A:
You need to install the fuel level sensor, connect the level sensor electrical connector, and install the sending unit.
By Bob
GM Specialist
01/11/2022Q: What should be noticed when installing the fuel sender assembly (Dual Tanks-Front)?
A:
You should always replace the fuel sender seal when installing the fuel sender assembly. Replace the lock ring if necessary. Do not apply any type of lubrication in the seal groove.
By Bob
GM Specialist
01/11/2022Q: What should be noticed when removing the fuel sender assembly (Dual Tanks-Rear)?
A:
You should not use impact tools. A significant force will be required to release the lock ring. The use of a hammer and screwdriver is not recommended. Secure the fuel tank to prevent fuel tank rotation.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the fuel sender assembly (Dual Tanks-Rear)?
A:
You need to remove the rear fuel tank, disconnect the evaporative emission (EVAP) lines, unlock the fuel sender lock ring, remove the J 45722 and the lock ring, carefully lift the fuel tank module from the fuel tank, disconnect the vapor line quick connect fittings to remove the module, remove the module from the fuel tank and discard the fuel tank module seal, and place the lock ring on a flat surface.
By Bob
GM Specialist
01/11/2022Q: How to install the fuel level sensor (Rear Tank)?
A:
You need to install the fuel level sensor, connect the level sensor electrical connector, and install the sending unit.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the fuel level sensor (Front Tank)?
A:
You need to remove the sending unit, disconnect the level sensor electrical connector., release the level sensor retaining clip, squeeze the locking tangs together, and remove the fuel level sensor.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the fuel sender assembly (Dual Tanks-Front)?
A:
You need to remove the front fuel tank, disconnect the fuel and evaporative emission (EVAP) lines from the fuel tank module, unlock the fuel sender lock ring, remove J 45722 and the lock ring, lift the fuel tank module from the fuel tank, disconnect the vapor line quick connect fitting to remove the module, remove the module and the fuel tank module seal, place the lock ring on a flat surface.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the fuel level sensor (Rear Tank)?
A:
You need to remove the sending unit, disconnect the level sensor electrical connector, release the level sensor retaining clip, squeeze the locking tangs together, and remove the fuel level sensor.
By Bob
GM Specialist
01/11/2022See more FAQs (3)