< Back ×
My Vehicle Change Vehicle
2006 GMC Yukon
< Back to View All
Brake Dust Shields, Backing Plates & Brake Hardware
- Department
- Brands
- Prices
Wagner® Parking Brake Cable for 2006 GMC Yukon
PartNumber: BC141922Product Specifications- UPC: 008536571001
- Part Description: 2006 GMC Yukon Parking Brake Cable
Vehicle Fitment- 2006 GMC Yukon | All Trims | All Engines
$46.21
OEM (Genuine) 2006 GMC Yukon Cable, Parking Brake Rear
PartNumber: 21997745Product Specifications- Notes: Tahoe, Yukon; Right
- Other Names: Rear Cable
- Item Dimensions: 3.1 x 14.6 x 13.7 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 GMC Yukon Cable, Parking Brake Rear
Vehicle Fitment- 2006 GMC Yukon | SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
OEM (Genuine) 2006 GMC Yukon Cable, Parking Brake Rear
PartNumber: 21997746Product Specifications- Notes: Tahoe, Yukon; Left
- Other Names: Rear Cable
- Item Dimensions: 4.2 x 11.1 x 11.3 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 GMC Yukon Cable, Parking Brake Rear
Vehicle Fitment- 2006 GMC Yukon | SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
OEM (Genuine) 2006 GMC Yukon Cable, Parking Brake Intermediate
PartNumber: 10391699
Product Specifications- Notes: Tahoe, Yukon
- Other Names: Intermediate Cable
- Item Dimensions: 11.6 x 10.8 x 3.7 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 GMC Yukon Cable, Parking Brake Intermediate
Vehicle Fitment- 2006 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
FAQ for Parking Brake Cable Repair
Q: What is the removal procedure for the park brake cable mounting bracket?
A:
You need to release the parking brake, raise and support the vehicle, release the tension on the cables, disconnect the rear cables from the equalizer, and remove the rear cables from the mounting bracket, the cable support bracket nuts, and the cable support bracket.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the front park brake cable mounting bracket?
A:
You need to release the parking brake, remove the park brake pedal, roll the carpet back to access the cable grommet, raise and support the vehicle, disengage the grommet and the cable, disconnect the front cable from the intermediate cable, remove the cable from the body mount and the cable.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the park brake cable in the right rear (With RPO NYS)?
A:
You need to release the parking brake, raise and support the vehicle, remove the park brake cable from the equalizer, remove the cable from the mounting bracket, the park brake cable, the bolt retaining the park brake cable, the rear brake cable mounting bracket bolt, the brake cable from the lever, the cable from the rear brake cable mounting bracket, and the brake cable from the guides and the body mounts.
By Bob
GM Specialist
02/11/2022Q: How to install the front park brake cable mounting bracket?
A:
You need to install the cable, snap the retainer tabs into the body mount, connect the front cable to the intermediate cable, route the cable in through the floor pan and engage the grommet, remove the safety stands, lower the vehicle, roll the carpet into place, install the park brake pedal, and adjust the park brake system.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the bolt?
A:
The recommended torque is 25 Nm (18 lb-ft).
By Bob
GM Specialist
02/11/2022Q: How to install the park brake cable equalizer?
A:
You need to connect the equalizer to the rear park brake cables, install the nut to the threaded end of the intermediate cable, remove the safety stands, lower the vehicle, and adjust the park brake system.
By Bob
GM Specialist
02/11/2022Q: What should we do if the vehicle is a 1500 series with the second design or a 2500 series?
A:
You should remove the nut from the threaded end of the intermediate cable, and disconnect the equalizer from the rear park brake cables.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the park brake cable in the left rear (With RPO NYS)?
A:
You need to release the parking brake, raise and support the vehicle, remove the park brake cable from the equalizer, remove the cable from the mounting bracket, the cable at the lower shock absorber mount, the rear cable mounting bracket bolt, the cable from the lever, the cable from the rear brake cable mounting bracket and the cable from the guides and the body mounts.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the support bracket nuts?
A:
The recommended torque is 85 Nm (64 ft. lbs.).
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the rear park brake cable bracket bolt?
A:
The recommended torque is 61 Nm (45 ft. lbs.).
By Bob
GM Specialist
02/11/2022See more FAQs (8)