< Back ×
My Vehicle Change Vehicle
2006 GMC Yukon
< Back to View All
Power & Heated Seat
- Department
- Brands
- Prices
Dorman® OE Solutions Front Driver Side Seat Heater Memory And Pedal Switch for 2006 GMC Yukon
PartNumber: 901-196Product Specifications- Notes: w/Adjustable Pedals
- Attached Lead Wires: Yes
- Housing Material: Plastic
- Illuminated: Yes
- OE Part Number: 15116862
- Terminal Type: Pin
- UPC: 885484498204
- Wiring Harness Included: Yes
- Part Description: 2006 GMC Yukon OE Solutions Front Driver Side Seat Heater Memory And Pedal Switch
Vehicle Fitment- 2006 GMC Yukon | All Trims | All Engines
$154.13
OEM (Genuine) 2006 GMC Yukon Switch, Driver Seat Adjuster Memory, Heater And Pedal
PartNumber: 15116862
Product Specifications- Notes: Seat Heater; All Models; W/O Pick-Up; W/O Escalade Esv
- Location: Driver Side
- Other Names: Memory Switch, Seat Heat Switch, Switch
- Item Dimensions: 8.3 x 3.3 x 3.2 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15179136
- Part Description: 2006 GMC Yukon Switch, Driver Seat Adjuster Memory, Heater And Pedal
Vehicle Fitment- 2006 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
OEM (Genuine) 2006 GMC Yukon Switch, Passenger Seat Heater
PartNumber: 15116861
Product Specifications- Notes: Seat Heater
- Location: Passenger Side
- Other Names: Seat Heat Switch, Switch
- Item Dimensions: 10.7 x 2.2 x 0.5 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15179135
- Part Description: 2006 GMC Yukon Switch, Passenger Seat Heater
Vehicle Fitment- 2006 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
OEM (Genuine) 2006 GMC Yukon Switch, Rear Seat Heater
PartNumber: 15083095
Product Specifications- Notes: All Models; Rear; W/O Escalade Esv
- Other Names: Switch
- Item Dimensions: 2.7 x 2.2 x 1.5 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 GMC Yukon Switch, Rear Seat Heater
Vehicle Fitment- 2006 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
FAQ for Seat Heater Switch Repair
Q: How to install the heated and cooled seat switch (Front-Platinum Models)?
A:
You need to install the switch assembly to the bezel, the 4 retaining screws, and the floor console bezel.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the heated and cooled seat switch (Front-Platinum Models)?
A:
You need to remove the floor console bezel, and the 4 retaining screws, and remove the switch assembly from the console bezel.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the heated and cooled seat switch (Rear-Platinum Models)?
A:
You need to insert a flat-bladed tool on either side of the switch to pry outwards, pull the switch out to gain access to the wire connector, and disconnect the wire connector.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the heated seat switch in the rear?
A:
You need to remove the center console end panel, disconnect the electrical connector, and remove the seat heater switch retaining screws and the switch from the vehicle.
By Bob
GM Specialist
01/11/2022Q: How to install the heated and cooled seat switch (Rear-Platinum Models)?
A:
You need to connect the wire connector to the switch and install the switch into the opening.
By Bob
GM Specialist
01/11/2022Q: How to install the heated seat switch in the front?
A:
You need to install the front seat heater switch assembly to the front trim panel, connect the electrical connector to the front seat heater switch assembly, and install the front trim panel.
By Bob
GM Specialist
01/11/2022Q: How to install the heated seat switch in the rear?
A:
You need to install the switch to the console panel and the retaining screw, connect the electrical connector, and install the center console end panel.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the heated seat switch in the front?
A:
You need to remove the front door trim panel, disconnect the electrical connector, and release the retaining clips for the front seat heater switch assembly to remove the switch and remove the front seat heater switch assembly.
By Bob
GM Specialist
01/11/2022See more FAQs (3)