< Back ×
2006 GMC Yukon Valve Cover
My Vehicle Change Vehicle
2006 GMC Yukon
< Back to View All
Valves, Valve Covers & Valvetrain
- Department
- Brands
- Prices
$71.42Product Specifications- Color: Natural
- Height: 3"
- Installation Hardware Included: Yes
- Item Grade: Standard Replacement
- Length: 19.5"
- Material: Aluminum
- OE Part Number: 12570427, 8-12570-427-0, 8-12561-820-0
- Oil Filler Cap Included: No
- UPC: 019495299905
- Valve Cover Type: Standard
- Width: 5"
- Part Description: 2006 GMC Yukon OE Solutions Driver Side Valve Cover Kit
Vehicle Fitment- 2006 GMC Yukon | All Trims | 8 Cyl 4.8L
- 2006 GMC Yukon | All Trims | 8 Cyl 5.3L
- 2006 GMC Yukon | All Trims | 8 Cyl 6.0L
OEM (Genuine) 2006 GMC Yukon Valve Cover
PartNumber: 12570427$125.55 MSRP:$207.82You Save: $82.27 (40%)Product Specifications- Notes: All Models; Left Bank
- Location: Driver Side
- Other Names: Valve Cover
- Item Dimensions: 5.2 x 5.0 x 24.5 inches
- Item Weight: 3.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12561820
- Part Description: 2006 GMC Yukon Valve Cover
Vehicle Fitment- 2006 GMC Yukon | Denali, Hybrid, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
OEM (Genuine) 2006 GMC Yukon Valve Cover
PartNumber: 12582224$104.05 MSRP:$165.24You Save: $61.19 (38%)Product Specifications- Notes: All Models; Right Bank
- Location: Passenger Side
- Other Names: Valve Cover
- Item Dimensions: 4.9 x 4.9 x 24.9 inches
- Item Weight: 2.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12570428, 12561819, 12561818, 12559896
- Part Description: 2006 GMC Yukon Valve Cover
Vehicle Fitment- 2006 GMC Yukon | Denali, Hybrid, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
FAQ for Valve Cover Repair
Q: How to remove the spark plug wires from the ignition coils?
A:
You need to twist each plug wire 1/2 turn and pull only on the boot to remove the wire from the ignition coil.
By Bob
GM Specialist
01/11/2022Q: How to install the valve rocker arm cover on the left?
A:
You need to install a new rocker cover gasket and the valve rocker arm cover, tighten the rocker arm cover bolts, install the PCV hose, apply thread lock GM P/N 12345382 or equivalent to the threads of the bracket bolts, install the ignition coil bracket, the ignition coil bracket studs and the spark plug wires to the ignition coils, position the engine harness, install the harness clips, connect the main electrical connector to the ignition coil wire harness, install the CPA lock and the engine sight shield.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the rocker arm cover bolts?
A:
The recommended torque is 12 Nm (106-inch lbs.).
By Bob
GM Specialist
01/11/2022