< Back ×
My Vehicle Change Vehicle
2006 GMC Yukon
< Back to View All
Wipers & Washers
- Department
- Prices
OEM (Genuine) 2006 GMC Yukon Wiper Arm
PartNumber: 15829647
Product Specifications- Location: Passenger Side
- Other Names: Wiper Arm
- Item Dimensions: 27.0 x 7.1 x 3.1 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 88937402, 10367563, 15114472
- Part Description: 2006 GMC Yukon Wiper Arm
Vehicle Fitment- 2006 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$29.49 MSRP:$53.41You Save: $23.92 (45%)
OEM (Genuine) 2006 GMC Yukon Wiper Arm
PartNumber: 15829648
Product Specifications- Location: Driver Side
- Other Names: Wiper Arm
- Item Dimensions: 30.6 x 6.1 x 6.1 inches
- Item Weight: 1.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 88958115, 15114471, 15139553
- Part Description: 2006 GMC Yukon Wiper Arm
Vehicle Fitment- 2006 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$31.34 MSRP:$56.75You Save: $25.41 (45%)
OEM (Genuine) 2006 GMC Yukon Wiper Arm
PartNumber: 15711688
Product Specifications- Other Names: Wiper Arm
- Item Dimensions: 35.0 x 21.4 x 6.1 inches
- Item Weight: 4.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 GMC Yukon Wiper Arm
Vehicle Fitment- 2006 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$74.86 MSRP:$135.52You Save: $60.66 (45%)
FAQ for Windshield Wiper Arms Repair
Q: What is the removal procedure for the wiper arm?
A:
You need to mark the position of the wiper blade on the windshield, disconnect the washer hose, remove the cover from the nut on the wiper arm, the nut from the wiper arm, and the wiper arm from the drive shaft, and clean the knurls of the drive shaft.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the wiper arm in the rear?
A:
You need to disconnect the washer hose, swivel the wiper arm cover open, remove the nut retaining the wiper arm to the wiper motor, and remove the wiper arm from the liftgate.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the nut on the drive shaft?
A:
The recommended torque is 30 Nm (22 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to install the wiper arm in the rear?
A:
You need to align the wiper arm to the vehicle, install the nut retaining the wiper arm to the wiper motor, swivel the wiper arm cover closed, connect the washer hose to the wiper arm, and check the rear wiper for proper operation.
By Bob
GM Specialist
01/11/2022