< Back ×
My Vehicle Change Vehicle
2007 Buick Lucerne
< Back to View All
Steering Systems
- Department
- Prices
OEM (Genuine) 2007 Buick Lucerne Sensor, Steering Wheel Position
PartNumber: 15231652
Product Specifications- Notes: W/Active Brake Control; Lucerne; W/Active Brake Control
- Other Names: Position Sensor, Sensor
- Item Dimensions: 3.8 x 3.2 x 1.8 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 88965330, 26059045
- Part Description: 2007 Buick Lucerne Sensor, Steering Wheel Position
Vehicle Fitment- 2007 Buick Lucerne | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
$95.46 MSRP:$166.15You Save: $70.69 (43%)
FAQ for Steering Angle Sensor Repair
Q: What is the removal procedure for the Steering Wheel Position Sensor?
A:
Disable the SIR system. Remove the steering column. Remove the boot seal, the steering shaft seal, the sensor retainer, and the sensor locator. Remove the steering wheel position sensor.
By Bob
GM Specialist
01/11/2022Q: What should be done BEFORE removing the sensor from the steering column?
A:
Identify the type of steering wheel position sensor from the illustrations shown before removing the sensor from the steering column.
By Bob
GM Specialist
01/11/2022Q: What should be noticed when servicing the Steering Wheel Position Sensor?
A:
If installing a new sensor, it will come with a pin installed in the sensor. Do not remove the pin until the sensor is seated. If the new sensor did not come with a pin installed, you must reorder a new sensor.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the Steering Wheel Position Sensor?
A:
Install the steering wheel position sensor, the sensor locator, the sensor retainer, the steering shaft seal, and the boot seal. Install the steering column into the vehicle. Enable the SIR system.
By Bob
GM Specialist
01/11/2022