< Back ×
My Vehicle Change Vehicle
2007 Buick Rainier
< Back to View All
Brake Boosters & Brake Master Cylinders
- Department
- Series
- Brands
- Prices
OEM (Genuine) 2007 Buick Rainier Master Cylinder
PartNumber: 15142479
Product Specifications- Other Names: Master Cylinder
- Item Dimensions: 12.3 x 7.9 x 6.4 inches
- Item Weight: 1.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Buick Rainier Master Cylinder
Vehicle Fitment- 2007 Buick Rainier | CXL | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
$52.99 MSRP:$100.00You Save: $47.01 (48%)
Centric® Premium Brake Master Cylinder for 2007 Buick Rainier
PartNumber: 130.66055Product Specifications- UPC: 805890100737
- Part Description: 2007 Buick Rainier Premium Brake Master Cylinder
Vehicle Fitment- 2007 Buick Rainier | All Trims | All Engines
$91.58
Cardone Reman® Remanufactured Master Cylinder for 2007 Buick Rainier
PartNumber: 10-3273Product Specifications- Notes: Supplied w/o Reservoir
- Bore Diameter (N): 1.062"
- E-Waste: No
- Installation Hardware Included: No
- Master Cylinder Color/Finish: Gray
- Master Cylinder Material: Aluminum
- Mounting Hole Quantity: 2
- Package Contents: Master Cylinder, Reservoir Pin Kit
- Port Quantity: 2
- Primary Port Size: 1/2 x 20
- Product Condition: Remanufactured
- Reservoir Included: No
- Secondary Port Size: 1/2 x 20
- UPC: 082617778671
- Part Description: 2007 Buick Rainier Remanufactured Master Cylinder
Vehicle Fitment- 2007 Buick Rainier | All Trims | All Engines
FAQ for Brake Master Cylinder Repair
Q: How to install the Master Cylinder Overhaul?
A:
You should install the lubricated return spring and secondary piston assembly into the cylinder bore, the lubricated, the new piston retainer, the master cylinder reservoir to the master cylinder, the reservoir cap and diaphragm to the reservoir, and the master cylinder to the vehicle.
By Bob
GM Specialist
01/11/2022Q: How to remove the Master Cylinder?
A:
You should disconnect the master cylinder fluid level sensor connector, disconnect the brake pipes from the master cylinder, plug the brake pipes, and remove the master cylinder mounting nuts and the master cylinder assembly.
By Bob
GM Specialist
01/11/2022Q: How to install the Master Cylinder?
A:
You should bench bleed the master cylinder, install the master cylinder assembly and the master cylinder mounting nuts, remove the rubber plugs from the brake lines, connect the brake pipe, and connect the master cylinder fluid level sensor connector.
By Bob
GM Specialist
01/11/2022Q: How to install the Master Cylinder Reservoir?
A:
You should install the lubricated seals, the reservoir to the brake master cylinder, and the reservoir retaining pins, remove the brake master cylinder from the vise, and install the brake master cylinder.
By Bob
GM Specialist
01/11/2022Q: How to remove the Master Cylinder Reservoir?
A:
You should remove the brake master cylinder assembly, the retaining pins for the brake master cylinder reservoir, the reservoir from the brake master cylinder, and the seals from the brake master cylinder.
By Bob
GM Specialist
01/11/2022Q: How to remove the Master Cylinder Overhaul?
A:
You should remove the brake master cylinder from the vehicle, the reservoir cap and diaphragm from the reservoir, the master cylinder reservoir from the master cylinder, the piston retainer, the primary piston assembly from the cylinder bore, the secondary piston with the primary and secondary seals, and the return spring.
By Bob
GM Specialist
01/11/2022See more FAQs (1)