< Back ×
My Vehicle Change Vehicle
2007 Buick Rainier
< Back to View All
Door Sheet Metal, Moldings & Weatherstrips
- Department
- Prices
OEM (Genuine) 2007 Buick Rainier Surround Weatherstrip
PartNumber: 19168173
Product Specifications- Notes: Gray
- Location: Passenger Side; Driver Side
- Other Names: Surround Weatherstrip
- Item Dimensions: 18.9 x 18.7 x 8.2 inches
- Item Weight: 6.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19120578, 19151468, 19209559, 19120580, 88987563, 88987565, 19120579
- Part Description: 2007 Buick Rainier Surround Weatherstrip
Vehicle Fitment- 2007 Buick Rainier | CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
$76.56 MSRP:$120.42You Save: $43.86 (37%)
OEM (Genuine) 2007 Buick Rainier Surround Weatherstrip
PartNumber: 19168171
Product Specifications- Notes: Cashmere;Gray
- Location: Driver Side
- Other Names: Surround Weatherstrip
- Item Dimensions: 4.8 x 18.1 x 17.5 inches
- Item Weight: 3.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19209561, 88892609, 19120582, 19120581, 88987559, 88987080, 19209560, 19151465, 19120583
- Part Description: 2007 Buick Rainier Surround Weatherstrip
Vehicle Fitment- 2007 Buick Rainier | CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
$93.73 MSRP:$141.41You Save: $47.68 (34%)OEM (Genuine) 2007 Buick Rainier Surround Weatherstrip
PartNumber: 19168172
Product Specifications- Notes: Cashmere
- Location: Passenger Side
- Other Names: Surround Weatherstrip
- Item Dimensions: 17.5 x 16.9 x 4.7 inches
- Item Weight: 3.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 88987560, 19120586, 19120584, 19151466, 88987079
- Part Description: 2007 Buick Rainier Surround Weatherstrip
Vehicle Fitment- 2007 Buick Rainier | CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
$93.73 MSRP:$141.41You Save: $47.68 (34%)
OEM (Genuine) 2007 Buick Rainier Surround Weatherstrip
PartNumber: 19120580
Product Specifications- Notes: Cashmere
- Location: Passenger Side; Driver Side
- Other Names: Surround Weatherstrip
- Item Dimensions: 17.7 x 17.8 x 3.1 inches
- Item Weight: 3.20 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 19168173
- Part Description: 2007 Buick Rainier Surround Weatherstrip
Vehicle Fitment- 2007 Buick Rainier | CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
$76.56 MSRP:$120.42You Save: $43.86 (37%)OEM (Genuine) 2007 Buick Rainier Surround Weatherstrip
PartNumber: 19209563
Product Specifications- Notes: Gray
- Location: Passenger Side
- Other Names: Surround Weatherstrip
- Item Dimensions: 3.1 x 17.9 x 17.3 inches
- Item Weight: 3.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19120585, 88987081
- Part Description: 2007 Buick Rainier Surround Weatherstrip
Vehicle Fitment- 2007 Buick Rainier | CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
$77.80 MSRP:$122.37You Save: $44.57 (37%)
OEM (Genuine) 2007 Buick Rainier Front Weatherstrip
PartNumber: 25775653
Product Specifications- Location: Passenger Side
- Other Names: Front Weatherstrip, Sealing Strip
- Item Dimensions: 4.2 x 23.1 x 1.2 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15284191, 15155416
- Part Description: 2007 Buick Rainier Front Weatherstrip
Vehicle Fitment- 2007 Buick Rainier | CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
$6.87 MSRP:$10.35You Save: $3.48 (34%)
OEM (Genuine) 2007 Buick Rainier Front Weatherstrip
PartNumber: 25775652
Product Specifications- Location: Driver Side
- Other Names: Front Weatherstrip, Sealing Strip
- Item Dimensions: 4.0 x 22.8 x 1.2 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15284190, 15155415
- Part Description: 2007 Buick Rainier Front Weatherstrip
Vehicle Fitment- 2007 Buick Rainier | CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
FAQ for Door Seal Repair
Q: How to remove the Auxiliary Weatherstrip?
A:
You should remove the push pin retainers from the front door sealing weatherstrip located at the base of the pillar, the screws from the weatherstrip side retainer, and the weatherstrip side retainer from the windshield pillar.
By Bob
GM Specialist
01/11/2022Q: How to install the Auxiliary Weatherstrip?
A:
You should install the weatherstrip side retainer to the windshield pillar, the screws to the weatherstrip side retainer, and the push pin retainers to the front door sealing weatherstrip located at the base of the pillar.
By Bob
GM Specialist
01/11/2022Q: How to install the Rear Door Opening Weatherstrip?
A:
You should align the weatherstrip to the door opening with the 2 dots positioned on the upper right and left side, align the weatherstrip to the door opening with the bond joint positioned at the lower center of the door opening and install the weatherstrip to the pinch-weld flange.
By Bob
GM Specialist
01/11/2022Q: How to install the Rear Door Upper Sealing Strip?
A:
You should insert the sealing strip tab into the door sheet metal, position the sealing strip to the door pinch-weld flange and apply pressure to seat the sealing strip, and ensure that the sealing strip is fully seated against the pinch-weld flange.
By Bob
GM Specialist
01/11/2022Q: How to install the Weatherstrip Side Retainer?
A:
You should install the side reveal molding to the windshield pillar, the screws to the side reveal molding, and the push-pin retainers to the front door sealing auxiliary weatherstrip located at the base of the pillar.
By Bob
GM Specialist
01/11/2022Q: How to remove the Weatherstrip Side Retainer?
A:
You should remove the push-pin retainers from the front door sealing auxiliary weatherstrip located at the base of the pillar, the screws from the windshield side reveal molding and the reveal molding from the windshield pillar.
By Bob
GM Specialist
01/11/2022Q: How to remove the Front Door Opening Weatherstrip?
A:
You should remove the front door sill plate and the weatherstrip from the pinch-weld flange.
By Bob
GM Specialist
01/11/2022Q: How to install the Front Door Opening Weatherstrip?
A:
You should align the weatherstrip to the door opening with the 2 dots positioned on the upper right and left side, the weatherstrip to the door opening with the bond joint positioned at the lower center of the door opening, install the weatherstrip to the pinch-weld flange and the front door sill plate.
By Bob
GM Specialist
01/11/2022Q: How to remove the Rear Door Opening Weatherstrip?
A:
You should remove the weatherstrip from the pinch-weld flange.
By Bob
GM Specialist
01/11/2022Q: How to remove the Rear Door Upper Sealing Strip?
A:
You should pull the sealing strip away from the door pinch-weld flange, lift upward to remove the upper portion of the sealing strip from the door pinch-weld flange, and remove the sealing strip from the door.
By Bob
GM Specialist
01/11/2022See more FAQs (5)