Other Names: Power Steering Cooler, Power Steering Oil Cooler
Item Dimensions: 38.5 x 10.1 x 5.5 inches
Item Weight: 2.40 Pounds
Fitment Type: Direct Replacement
Part Description: 2007 Buick Rainier Cooler, P/S Fluid
More Info
Vehicle Fitment
2007 Buick Rainier | CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
FAQ for Power Steering Cooler Repair
Q: How to install the Power Steering Cooler (4.2L)?
A:
You should install the power steering cooler to the radiator support, and the power steering cooler mounting bolts, remove the drain pan from under the vehicle, and install the front air deflector.
By Bob
GM Specialist
01/11/2022
Q: How to remove the Power Steering Cooler (4.2L)?
A:
You should remove the front air dam deflector, install a drain pan under the vehicle and remove the power steering cooler mounting bolts and the power steering cooler from the radiator support.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the power steering cooler mounting bolts?
A:
The recommended torque is 20 N.m (15 lb-ft).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to remove the Power Steering Pump Shaft Seal (CB)?
A:
You should remove the power steering pump from the vehicle and use a small chisel to remove the seal.
Q: How to assemble the Power Steering Fluid Reservoir-Off Vehicle (CB Series)?
A:
You should install the new O-ring seal onto the neck of the reservoir, the reservoir onto the hydraulic pump assembly, the new reservoir retaining clips(supplied with the pump.